Loading ...
Loading ...
Loading ...
26
Tank tensioning
Tank Belt Adjustment
End Cap
Remove large metal inspection plate as
shown above right.
Using a long tool, push out the rear end
cap as pictured right. This will give you
access to the tank tensioning bolt (shown
bottom right).
Loosen both the front and rear tank bolts
as shown below. Remove front rubber
belt cover.
Using a 6mm Allen key, tighten the belt
using the tank tensioning bolt until the
belt no longer slips during hard rowing.
Tip: Twist the belt by hand to gauge
tightness. Correct tension should be ob-
tained when no longer able to twist more
than 45 degrees.
Note: Do not over tighten tank bolts.
Loading ...