Spotlight Features:
Motion/Light Sensor: Light instantly turns on when it
detects motion from up to 25 feet away. The light sensor
conserves battery life by preventing the light from activating
in daylight.
Auto Shut-o: Light shuts o automatically after 20
seconds if no motion is detected.
Fully Adjustable: Motion Sensor Spotlight can be
rotated 360° as well as up and down.
Bright LEDs: 400 Lumens covers up to 400 sq ft.
Durable, Weather Resistant: Tight seals and UV resistant
material allow the light to work in all weather conditions.
Installation Instructions
Wireless Motion Sensor LED UltraBright Spotlight
MB380 / MB390
• 1 Small Screwdriver
• 4 D-Cell Alkaline Batteries
• 1 Wireless UltraBright Spotlight
• 3 Screws
• 3 Anchors
LED Lights
Mounting Base
Mounting Base
Thumb Screw
Knuckle Screw
Motion &
Light Sensor
NOTE: Light sensor only allows light to activate in darkness. We recommend you test in a dark room or closet.
What you need to install:
Thank you for purchasing the Mr Beams
®
Wireless UltraBright Spotlight. We are committed
to eliminating darkness using the latest in
Light-Emitting Diodes (LEDs). LEDs are the most
ecient and durable light sources available. We
are certain that your light will contribute to a safer
environment and provide light where you need it at
a very reasonable cost.
What is included per light:
www.mrbeams.com
1. Remove front cover of Spotlight by rotating
counter-clockwise as shown above. Pull face out
from cup to reveal battery holder.
2. Separate two parts by squeezing tabs and pulling
apart.
4. Remove mounting base by turning thumb
screw counter-clockwise. Pull mounting base o
stem of light.
5. Drive three screws into three holes to mount
the mounting base. For best results, drill pilot
holes rst and insert anchors.
6. Insert spotlight back into mounting base pointed in
the desired direction. Tighten mounting base thumb
screw.
7. To pivot Spotlight up and down, loosen knuckle
screw in the joint of the Spotlight stem and adjust
Spotlight head to proper direction. Tighten
knuckle screw.
3. Insert 4 D-Cell batteries into Spotlight. Attach
holder by aligning the grooves on the side and
match white arrows, snapping both tabs in the
holder.
Tips:
•
Use only new alkaline D-Cell batteries with 1.5V rating.
•
Do not mix old and new batteries. If batteries are not new, it may cause the light to malfunction.
•
Install batteries with polarity in correct position.
•
Light may activate when batteries are inserted. Simply take light into a dark room. Allow
batteries to settle, then test activation.
•
If your light will not turn o, it means that it is time to replace the batteries.
* 1 year limited warranty. Visit site for details.
* Visit our website to view installation video.
Battery Caution:
1) Do not mix old and new batteries
2) Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium)
or (Nickel Metal Hydride) batteries
3) Do not dispose of batteries in re
4)Batteries should be recycled or disposed of as per state and local guidelines
600 Beta Drive, Mayeld Village, Unit 100, Mayeld, OH 44143
877.298.9082
