Loading ...
Loading ...
Loading ...
USE AND CARE
Always turn the downdraft blower on before you begin cooking
to establish an air flow in the kitchen. Let the blower run for a few
minutes to clean the air after you turn the cooktop off. This will
keep the whole kitchen cleaner and brighter.
CONTROLS
USE AND CARE - (Continued)
CLEANING
IWARNING" Always disconnect electricl
power supply before cleaning unit.
Use a mild detergent suitable for painted surfaces. DO NOT USE
ABRASIVE CLOTH, STEELWOOL PADS, OR SCOURING POW-
DERS. Vacuum blower to clean. Do not immerse blower in water.
Wash the 2 aluminum grease filters in a mild detergent solution
or a dishwasher. Remove them from the air vent by grasping the
tab at the top of each filter.
Note: The filters are different sizes. Be sure to replace them as
removed, (wider one on the left), with tabs UR
Turn the downdraft blower ON by pressing down on the activating
switch. The air vent will rise.
\
KNOB
The blower can be turned ON or OFF and its speed can be
adjusted with the recessed knob on the right side of the air vent.
SERVICING
I WARNING: Always disconnect electric I
power supply before servicing unit.
It may be necessary to remove the downdraft blower system from
the cabinet in order to service components such as the blower
motor or air vent mechanism.
Disconnect power to the cooktop and remove it first. Reverse the
steps under "MOUNT THE UNIT" to remove the downdraft from
the cabinet.
Turn the downdraft blower OFF by pressing the activating switch
again. The air vent will go down and the blower will shut OFE
Note: For most convenient operation, set the blower to your fa-
vorite speed.The blower will come on to this speed whenever the
activating switch is pressed and the air vent rises.
5
Loading ...
Loading ...
Loading ...