Loading ...
Loading ...
Loading ...
EN
46
Picture mode (Photography)
INTERVAL SHOOTING
This camera allows you to capture motion sequences over extended
periods of time automatically using the interval shooting function. You
must specify the interval between shots and the number of frames in the
series.
Specifying the number of pictures
▸ Select CAMERACAMERA
▸ Select Drive ModeDrive Mode in the main menu
▸ Select IntervalInterval in the submenu
▸ Select FramesFrames
• A number pad submenu will appear (see p. 28).
• Any new setting entered via the number pad submenu will overwrite
any previously set number.
• You can enter a number between 1 and 9999.
Specifying the intervals between shots
▸ Select CAMERACAMERA
▸ Select Drive ModeDrive Mode in the main menu
▸ Select IntervalInterval in the submenu
▸ Select Interval TimeInterval Time
▸ Select the desired interval between shots
▸ Press down the shutter button to start the series
Notes
• The camera will automatically use the factory settings if no number is
entered.
• The function remains active until it is deactivated via the menu.
Canceling a running interval shooting
▸ Press the TL button, BL button or the BR button
• Continue by pressing the shutter button again.
Starting a new series during a current interval shooting
▸ Press the shutter button
Notes
• The camera's buffer memory allows only a limited number of pictures
in series.
• The camera may switch off and on again if “Auto power off” is set and
no other camera operation occurs between the individual shots.
• Interval shooting over an extended period of time in a cold location or
in a place with high temperature and humidity may result in malfunc-
tions.
• Interval shooting will be interrupted or canceled in the following
situations:
– if the battery is depleted
– if the camera is switched off
– if the inserted memory card is full
Make sure to use a sufficiently charged battery.
• Interrupted or canceled interval shooting an be resumed by switching
the camera off, replacing the battery or memory card as needed and
then switching the camera back on. The pictures taken after function
interruption will be stored in a separate group.
• The interval function remains active after a picture series is completed,
and also after the camera is switched off and on again. You will have to
change functions in the Drive ModeDrive Mode submenu if you want to exit the
mode. A prompt will be displayed on screen if the camera is switched
off and on again while the IntervalInterval shooting function is active.
• The availability of this function does not mean that the camera is
suitable for use as a monitoring device.
• Regardless of how many pictures were taken in a series, the last
picture in the series or the last picture in the series or the last picture
saved on the memory card while the saving process is ongoing will be
displayed first in both review modes.
SELF-TIMER
You can use the self-timer to take a picture with a delay of either 2 or
12s. This is useful for group photographs in which you want to be
included or if you want to avoid blurring caused by an unsteady hand.
We recommend that the camera is placed on a tripod.
▸ Select CAMERACAMERA
▸ Select Drive ModeDrive Mode in the main menu
▸ Select Self Timer 2 sSelf Timer 2 s or Self Timer 12 sSelf Timer 12 s in the submenu, depending on which
delay time you want.
▸ Shutter release
• With 2s delay time:
Exposure metering is completed first; in Autofocus mode, the mirror
folds up when focusing is completed. The delay time only starts after
this.
• With 12s delay time:
The delay time starts when the shutter button is pressed down fully
and the mirror folds up 2s before the picture is taken
• A flashing LED at the front of the camera counts down the first 10s
time delay if 12s delay were selected. The same countdown is
shown in the LCD panel.
• The delay time can be restarted/delayed at any time by pressing the
shutter button again.
Canceling the countdown of the running self-timer delay time
▸ Switch the camera off on the main switch
or
▸ Press the TR/BR/TL/BL button (only available during the initial 10 s of
a 12s delay time)
Note
If you no longer wish to use the self-timer, it must deactivated in the menu
as even switching off the camera will not delete the settings for this
function.
Loading ...
Loading ...
Loading ...