Loading ...
Loading ...
Loading ...
10
INSTALLATION
It is recommended that the stove be installed and
serviced by an authorized professional.
Proper installation of this stove is necessary for safe
and efficient operation. Installing this product improperly
may result in a house fire and/or personal injury.
STOVE PLACEMENT
Sketch out a plan for installing the stove, including
dimensions, before permanent placement. When
determining the location for the stove, wall stud location
is critical. You may need to adjust the location of the
stove to avoid encountering a wall stud. Before placing
the pellet stove, connect the vent to allow for minimum
clearance to combustable walls.
FLOOR PROTECTION REQUIREMENTS
The stove must be installed on a noncombustible floor,
with proper floor protection, or on a masonry hearth.
When a clean out T-vent is installed on the inside of a
home, the floor protector must extend 2" beyond the rear
of the T-vent. See Figure 2
When stove is vented straight through the wall and the
clean out T-vent is on the exterior of the home, the
minimum clearance is 2" from the back of the stove to
the wall. See Figure 3
Figure 2 Figure 3
Figures 2 and 3: Pellet stove floor pad clearances
WARNING
Read this entire manual before you install and use
this stove. Failure to follow the instructions may
result in property damage, bodily injury, or even
death.
Do not install a flue damper in the exhaust
venting system of this unit.
Do not connect this unit to a chimney flue that
services another appliance.
Children and adults should be aware of the
hazards of high surface temperatures and should
stay away to avoid burns to skin and/or clothing.
Young children should be carefully supervised
when they are in the same room as the stove.
Clothing and other flammable materials should
not be placed on or near this unit.
CAUTION
This stove should not be used as the only source of
heat in the home. Power outages and periodic
maintenance will result in a total loss of heat.
Contact local building or fire officials regarding
restrictions and installation inspection
requirements for your area.
Contact your local authority (Municipal building
department, Fire department, Fire prevention
bureau, etc...) to determine the need for a permit.
Keep combustible materials (such as grass,
leaves, etc...) at least 3 feet away from the flue
outlet on the outside of the building.
Installation and repair of this pellet stove should
be done by a qualified service person. The
appliance should be inspected before use, and at
least annually by a qualified service person. It is
imperative that the control compartments, fire
box, and circulating air passageways of the stove
be kept clean.
Loading ...
Loading ...
Loading ...