Loading ...
Loading ...
Loading ...
EN
CFX3 Operation
25
Connecting to a battery
➤ Proceed as shown (fig. 7, page 7).
Connecting to an AC power supply
D
➤ Proceed as shown (fig. 8, page 7).
7.5 Using the cooler
A
I
• Switching on the cooler: fig. 9, page 8
• Switching off the cooler: fig. 0, page 8
7.6 Using the display
Display states (fig. a, page 8)
DANGER! Electrocution hazard
• Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
• If you are operating your cooler on board a boat from a AC power
supply, you must install a residual current circuit breaker between the
AC power supply and the cooler.
Seek advice from a trained technician.
NOTICE! Risk of overheating
Ensure at all times that there is sufficient ventilation so that the heat that
generated during operation can dissipate. Ensure that the ventilation
slots are not covered. Make sure that the device is sufficiently far away
from walls and other objects so that the air can circulate.
NOTE
When operating with the battery, the display switches off automatically
if the battery voltage is low.
Item Description
A Stand by
BIdle
C Locked
CFX3_OPM_APAC(en).book Seite 25 Donnerstag, 23. Januar 2020 6:54 18
Loading ...
Loading ...
Loading ...