Questions? Contact our U.S.-based
Consumer Care at 1-800-654-8483
between 7AM-8PM, M-F, Central Time.
See reverse for easy-to-follow instructions
and exclusive deals.
Please call before
returning to store
CALL
To operate the bias lighting feature, simply press the
ON/OFF switch located on the antenna’s USB cord.
At 6500K, the light produced by this antenna is
scientically proven to reduce eyestrain and enhance
picture quality by reecting light off the wall behind your
TV, providing an attractive soft white glow.
Maximize the number of channels by running a
TV channel scan after installation and anytime you
relocate your TV. Refer to your TV’s instruction
manual, if necessary.
Position the antenna on top of the TV for
best performance.
Visit www.antennaweb.org to determine the
available television stations and broadcast tower
locations in your area.
Connect Place
PureBias
™
Lighting Operation
Helpful Antenna Tips
Place antenna on top of
TV with light feature facing the wall.
Perform TV channel scan.
QUESTIONS? ISSUES?
CALL OUR U.S.-BASED EXPERTS AT
1-800-654-8483
Tip 1: Consult the TV manual or contact the TV’s
manufacturer for detailed instructions.
Tip 2: Rescan for channels anytime you move the antenna.
100%
recyclable
Separate
paper
from plastic
before
recycling
byjasco.com/recycle
paper made from 25%
post consumer waste
CHANNEL SEARCH
Scanning for channels
73% .
MADE IN CHINA
GE is a trademark of General Electric Company and is under
license by Jasco Products Company LLC, 10 E. Memorial Rd.,
Oklahoma City, OK 73114.
This Jasco product comes with a limited-lifetime warranty.
Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM-8PM, M-F, Central Time.
53592 V2 05/22
1. Connect Micro USB cable to antenna
bracket and then insert the USB-A
connector into the TV’s USB-A port or
a USB-A power adapter (not included).
2. Connect Antenna to TV’s coax cable jack.
Best TV placement for enhanced
viewing with PureBias
™
lighting
Use provided hook-and-loop tape to place
ON/OFF switch in desired location.
HDTV
HDTV
Enlighten
HD Antenna
User Manual
1. Open the TV’s setup or settings menu.
2. Select scan, auto tune, channel search or channel scan,
making sure it’s set to scan for over-the-air channels
rather than cable.
3. Wait for the TV to complete the channel scan.
Lighting feature does not work
with xed- or ush-mounted TVs
Tilt and full-motion
TV mounts
6-18in.
from wall
Antenna
1. USB
Bias lighting
ON/OFF switch
6500K bias
lighting feature
2. Coax
Loading ...
Loading ...
Loading ...
