Loading ...
Loading ...
Loading ...
English - 16
Storing Channels in Memory (Automatic Method)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons to select “Channel”, then press the ENTER button.
2. Press the ▲ or ▼ buttons to select "Auto Program", then press the ENTER
button.
3. Press the ▲ or ▼ buttons to select the antenna connection, then press the
ENTER button.
Air: “Air” antenna signal. / Cable: “Cable” antenna signal. /
Air+Cable: “Air” and “Cable” antenna signals.
4. When selecting the Cable TV system : Press the ENTER button to start the auto
program. By default, the cable TV system is set to “STD”. If you want to select
another type of cable system, press the ▲ or ▼ button to select
“STD”, “HRC” or “IRC”.
STD, HRC and IRC identify various types of cable TV systems. Contact your
local cable company to identify the type of cable system that exists in your
particular area. At this point the signal source has been selected.
Press the ENTER
button to start the auto program.
To stop the search before it has finished, press the ENTER button with stop
selected.
5. After all the available channels are stored, the “Auto Program” menu reappears.
Press the EXIT button to exit.
Move Enter Return
Select the antennas to memorize.
Channel
Move Enter Return
TV
Start
Air
Cable
Air+Cable
Start
Start
Auto Program
Cable Channel 50
50%
Stop
Enter Return
Auto Program in Progress.
Move Enter Return
Selects a cable system.
Auto Program
Move Enter Return
TV
Analog
Start
STD
HRC
IRC
Digital
STD
HRC
IRC
Antenna : Air ►
Auto Program
►
Clear Scrambled Channel
►
Channel List
►
Name
►
Fine Tune
►
Signal Strength
►
LNA : On
►
Channel
Move Enter Return
TV
Plug & Play
Enter Return
Auto Program is complete.
16 Channels were memorized.
Air : 16,
Cable : 0.
OK
BN68-01178A-Eng.indd 16 2007-02-15 �� 8:57:12
Loading ...
Loading ...
Loading ...