Loading ...
Loading ...
Loading ...
page 6
6. Fan Assembly.
hanging
bracket
motor
mounting
nuts and flat
washers
motor assembly
motor
mounting
nuts and
flat washers
j-hook
7. Motor Housing Assembly.
Temporarily raise motor housing to
hanging bracket to determine which
2 screws in hanging bracket align with
slotted holes on top rim of motor
housing. Partially loosen the 2 screws in
the hanging bracket that correspond to
slotted holes in the motor housing.
Remove the other 2 screws from the
hanging bracket.
Now, raise motor housing to hanging
bracket again, allowing slotted holes in
motor housing to align with loosened
screws in hanging bracket. Twist motor
housing to lock. Re-insert the 2 screws
that were previously removed and then
tighten all screws to secure motor
housing.
motor
housing
screws
motor
housing
screws
motor
housing
hanging
bracket
Remove motor assembly from j-hook on
hanging bracket. Lift motor assembly to
hanging bracket and carefully push wiring
and wire connectors into outlet box. Align
holes in top of motor assembly with bolts
in hanging bracket and push up so that
bolts come through holes. Secure motor
assembly with flat washers and motor
mounting nuts that were previously
removed (refer to Section 4, page 4).
WARNING: It is extremely important to
tighten motor mounting nuts completely
so that fan is mounted securely.
Loading ...
Loading ...
Loading ...