Islandaire EZ42092731S46AA User Manual

Loading ...

Manufacturer of Quality Air Conditioning and Heating Products • www.islandaire.com • sales@islandaire.com • (800)-886-2759

Performance Specifications

Packaged Terminal

Cooling Unit with Heat

Pump or Electric Heating

PART I: SPECIFICATIONS

Size Range: Cooling: 6,800 to 15,000 Btuh

Heating: 6,100 to 14,000 Btuh Heat Pump

4,400 to 17,100 Btuh Electric

PART II: GENERAL

1.01 SYSTEM DESCRIPTION

Single piece, thru-the-wall electrically controlled

unit using hermetic rotary compressor for cooling

and heat pump or electric resistance heat.

A. Insulated Wall Sleeve:

Shall be entirely constructed of galvanized, heavy-

gauge steel with an Antique Ivory powder paint

corrosion resistant nish. Wall sleeves shall be

installed through the wall as shown on plans and

shall have factory provisions for use of appropriate

fastening devices to secure sleeve to the wall. In no

event shall fasteners be installed through the base

pan in the bottom of the wall sleeve.

Wall sleeve shall provide excellent thermal insula-

tion, will have superior outdoor noise absorption

and shall be corrosion free for the life of the prod-

uct.

Wall sleeve must have dimensions of 42 in. width x

16 in. height x 14-7/8 in. depth and be shipped with

a rear weather barrier installed.

B. Outdoor Louvered Grille:

Shall be (stamped) (architectural) anodized alu-

minum as shown on plans. Louver shall be (n-

ished natural) (painted) as shown on the schedule.

Louvers shall be easily installed from the inside of

the building aer the cabinet/wall sleeve has been

installed. Special eld fabricated louvers must be

approved by the PTAC manufacturer as to free area

and air circulation requirements.

Outdoor grille shall resist corrosion, breakage and

match the color specied on drawing schedule and

specications.

C. Subbase:

Subbase will support the wall sleeve when it extends

into the room more than 4 inches. Subbase must

come from the factory pre-assembled, with a built

in receptacle (size as specied on drawing schedule

and specications) or with factory installed hard-

wire, pre-sized for an exact t to the unit.

1.02 QUALITY ASSURANCE

System shall be approved and certied by ETL.

Chassis capacity and eciency performance shall

be tested in accordance with ARI standard 310/380.

Chassis shall meet ASHRAE Standard 90.1 for

minimum energy eciency.

1.03 DELIVERY, STORAGE, AND HANDLING

A. e packaging of the chassis shall be sucient to

protect the chassis from damage during shipment via an

enclosed truck.

B. Chassis, wall sleeves, and grilles shall be shipped in

separate cartons. Universal handling instructions shall

be dened and visible on the carton, from front, back

and sides.

C. Unit shall be stored and handled per manufacturer’s

recommendations.

Loading ...

Islandaire EZ42092731S46AA 9500 BTU PTAC Air Conditioner

User Manual - Page 46