Loading ...
Loading ...
Loading ...
Saw Operations
Problem Probable Cause What to Do
Crosscuts not accurate at
0° and 45 ° miter.
Looseness between column tube Go to Alignment of the Blade,
and column support. Adjusting E_evation.
Crosscut travel not square
with fence.
Go to Alignment of the Blade,
Squaring Crosscut Travel.
Column is loose in support.
Go to Alignment of the Blade,
Adjusting Elevation.
Arm not indexing properly. Go to Maintaining Your Saw,
Adjustments for Wear, Miter
I_ck.
Carriage assembly loose on arm. Go to Alignment of the Blade,
Squaring Blade to Table for
Ripping.
Looseness between yoke and car- Go to Maintaining Your Saw,
riage assembly. Adjustments for Wear, Swivel
Lock.
Sawdust between workpiece and Keep front table clean.
fence.
Saw cuts at slight bevel
(not 90 ° to table).
Fence not straight.
Work table not properly leveled.
Blade not square to table.
Replace fence.
Go to Alignment of the Blade,
Leveling Front Table.
Go to Alignment of the Blade,
Squaring Blade to Table for
Crosscutting.
Carriage Bearings Loose
Go to Alignment of the Blade,
Squaring Blade to Table for
Ripping.
Bevel lock loose.
Go to Maintaining Your Saw,
Adjustments for Wear, Bevel
Lock.
83
Loading ...
Loading ...
Loading ...