Loading ...
Loading ...
Loading ...
INSTALLATION 13
Removing/Assembling fhe
Freezer Drawer Handle
Removing "the Handles
1 Loosen the set screws D located on the
lower side of the handle with a 1/s in. Atlen
wrench and remove the handle.
Loosen the mounting fasteners _ that
connect to the
freezer drawer
and handle
using a//4 in.
Allen wrench,
and remove
the mounting
fasteners.
Assembling "the Handles
1 Assemble the mounting fasteners D at
both ends of the handle using a//4 in. Atlen
wrench.
Place the handle on the door by fitting
the handle
footprints over
the mounting
fasteners and
tightening the
set screws
with a//g in.
Allen wrench.
Removing/Assembling fhe
Doors and Drawers
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
is the recommended procedure.
F_ WARNING
• If your entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
• Use two or more people to remove and
install the refrigerator doors. Failure to do
so can result in back or other injury.
• Disconnect the electrical supply to the
refrigerator before installing. Failure to do
so could result in serious injury or death.
• Do net put hands, feet or other objects into
the air vents or bottom of the refrigerator.
You may be injured or receive an electrical
shock.
• Be careful when handling the hinge and
stopper, to avoid injury.
° Remove food and bins before detaching the
doors and drawers.
r_ WARNING
When assembling or disassembling the
handle:
• Grasp the handle tightly to avoid dropping it.
• Do not swing the handle into nearby people
or animals.
• Make sure that the bracket hole of the
handle fits properly into the stopper bolt of
the door. Assemble the set screws to fix
the handle into place.
• Make sure that there is not a gap between
the door and handle after assembling the
handle.
\__J
Loading ...
Loading ...
Loading ...