Loading ...
Loading ...
Loading ...
8
ASSEMBLY INSTRUCTIONS
14
13. Remove the three tter plate screws from the tter
plate. Connect the 9-pin connector from the fan to the
9-pin connector from the light kit. Then, use the
tter plate screws to secure the light kit to the tter plate.
14. Remove the nial and nial cap from the threaded rod
at the bottom of the light kit. Feed the pull chain coming
from the switch housing through the grommet at the
bottom of the light kit.
13
Fitter Plate
Screw
9-pin
Connector
Switch Housing
Light Kit
Grommet
15
15. Feed the pull chains through the appropriate holes in
the glass bowl, the nial cap and the nial. Lift the center
hole in the glass bowl and nial cap over the threaded rod
of the light kit and secure with the nial. Then, install the
E26-base LED bulbs into the sockets of the light kit.
Note: Compatible with any E26-base LED, CFL, or
incandescent bulb (60 watt max.).
Skip to Step 18.
Finial Cap
Finial
Bulb
Finial
Finial Cap
Glass Bowl
16
Switch
Housing
Plug Button
Switch
Housing
Light Kit
Lock Washer
Hex Nut
16. NO LIGHT KIT INSTALLATION OPTIONAL
To install the fan without the light kit, remove the
preassembled hex nut and lock washer from the threaded
rod inside the switch housing. Disconnect the single-pin
connectors from inside the switch housing. Then detach
the light kit from the switch housing. Insert the plug
button from the hardware bag into the center hole of the
switch housing.
Loading ...
Loading ...
Loading ...