Loading ...
Loading ...
Loading ...
22
Instructions for using the oven
FAVOURITES
This oven can be programmed to remember the settings used
to cook your favourite dishes.
At the end of cooking, if you wish to save the settings used
(function, time, temperature, etc.), press the
button.
At this point, the display shows the message “Press
to save”.
Press button and the oven will propose the rst available
position from 1 to 10. If you wish to customise the position, you
can change the number by turning the “BROWSE” (+/-) knob
before conrming your choice with the
button.
When the memory is full or the position is already in use, the
function is overwritten.
If, on the other hand, you do not wish to memorise the settings,
simply press the
button, proceed to another function
by turning the “BROWSE” knob, or switch o the oven. To
subsequently view saved settings, turn the “FUNCTIONS” knob
until the display shows the
symbol, then select one of the
stored functions, turning the “BROWSE” (+/-) knob until the desired function is displayed.
Press button
, followed by button to start cooking.
SETTINGS
1. To change certain display settings, select “SETTINGS” from the main menu by turning the “Functions”
knob.
2. Conrm by pressing
: the display shows which settings can be changed (language, volume of
acoustic signal, display brightness, time, energy saving function, power).
3. Change the setting by turning the "Browse" knob.
4. Press button
to conrm.
5. Follow the instructions of the display to change the settings.
6. Press button
; a message appears on the display conrming your selection.
N.B: When the oven is switched o, if the ECOMODE ("Energy saving") function is selected (ON), the
display switches o after a few minutes, showing the clock. To view information on the display and
switch the light on again, just press any of the buttons or turn one of the knobs. If the ECOMODE is
activated during a cooking function, the cavity lamp will be switched o after 1 minute of cooking and
reactivated for each user interaction. If, on the other hand, the function is not selected (OFF), after a few
minutes the display is merely dimmed.
KEY-LOCK
This function can be used to lock the control panel buttons.
To activate it, press
and at the same time for at least 3 seconds.
If activated, the functions of the buttons are locked and the display shows a message and the symbol
.
This function can also be activated during cooking.
To deactivate it, repeat the above procedure. When the key-lock function is activated, the oven can only
be switched o by turning the knob to 0 (zero). In this case, however, the previously selected function
will have to be set again.
Forced air
Press
to save to cancel
2
Press to save to cancel
Favourite has been saved
Loading ...
Loading ...
Loading ...