Loading ...
Loading ...
Loading ...
E
5 SERVICER'S TECH. INFORMATION
!1 ""
!
,,,' I"BACKWASHCYCLE TIMES
Factory set cycle times are: BACKWASH.._ 25 min., FAST RINSE... 5 min. Do the following to check for
correct cycle times,
NOTE: NOTE:
Removing from electrical power (varies from 6 to 15
hours) resets timer to factory programming.
DISP_Y MUST SHOW TIME AND
DAY1.Press and_ [].,_entire _orLS_l
2 d'splaYPress[]C°mes°n'2:00shows; meam l_ 2:001
ing #2 cycle (not used) and 0
minutes.
ba. pressff2:00 !sho'W,lfother than[]until2:00 (2:002:00go tOshowstoStep3.2:15, j
minutes.
ba. Pressffotherlf3:25_show,than 3:25{3:OOuntiI 3:25 shows,g° t°t°step 4"3:30)'[_
2: 21
3:251
3: 71
ff the water supply has no iron and bow sediment
content, a shorter backwash time could be adequate,
and will conserve water_ On otherwater supplies, the
_ter may require a backwash longer than 25
minutes.
4. Press [] _ _. 4:05 shows;
meaning #4 cycle (fast rinse)
and 5 minutes.
a. ff4:05_show, go to step
5.
b. ff other than 4:05 (400 to 4:30),
press [] until 4:05 shows,
5. Press_ .. _ 18:88 shows.
6. Press_to return present
time and day.
L
2O
Loading ...
Loading ...
Loading ...