Loading ...
Loading ...
Loading ...
27
4. Once secure, the condenser wire harness along with the white and red compressor
wires can be reconnected and the tape from the fiber board can be reattached to the
fan shroud.
5. Reattach the assembly to the rear using the screw previously removed.
4.1.4: Condenser Fan Blade Spacing
If the condenser fan blade has been removed from the motor shaft the fan blade must be
properly re-spaced to achieve the optimal performance from the condenser.
The correct distance from the tip of the fan blade to the front of the shroud is 9/16” (.56”)
Bracket mounting tab.
Bracket mounting slot.
Loading ...
Loading ...
Loading ...