Loading ...
Loading ...
Loading ...
259
The Door Sensor
The door sensor is located on the bottom cabinet flange; approximately 5 ¼” away from the
inside flange of the cabinet; on the handle side of the cabinet (Exact measurement location
attached). The Refrigerated Drawers do not use this technology, dual rocker switches are used
for drawer models.
The door sensor is resistance activated by the pressure from the door gasket. Light
functionality and the door alarm are directly related to this switch.
Door Sensor Removal
1. Remove the toe grill.
2. Disconnect the door sensor at the harness terminal behind the trim piece. See photo
on page 1.
3. Remove the door sensor from the cabinet by starting in one of the upper corners and
peeling in a downward motion.
4. Once the sensor has been removed from the flange area:
a. Grasp the sensor with the right hand using the thumb and forefinger.
b. Grasp the electrical strip portion of the sensor between the thumb and
forefinger on the right hand.
5. Slowly work the sensor through the gap on the lower trim section to remove. The
upper portion of the electrical strip has some adhesive backing so care is advised.
Door Sensor location
Sensor disconnect terminal
Cabinet trim
Loading ...
Loading ...
Loading ...