Loading ...
Loading ...
Loading ...
147
16.11.2: Ice Maker Removal
To remove the crescent ice maker, the
screws located inside the two upper
mounting brackets need to be loosened.
There is no need to remove these screws.
A third screw on the bottom font of the
ice maker body needs to be completely
removed.
Lift the ice maker from the bottom and set
the ice maker aside. This will expose the
wire harness and water fill tube.
Remove the black wire grommet on the
rear of the freezer cover. This will expose
the connector for the ice maker harness.
Grasp and squeeze the connector by the
release until it disengages. Pull to disconnect.
The ice maker is now disconnected and can
be removed.
Water fill tube.
Loading ...
Loading ...
Loading ...