Loading ...
Loading ...
Loading ...
26
20306742
KHLDV Series Gas Fireplace
MILLIVOLT: OPTIONAL FAN/BLOWER SYSTEM
Clip
Firebox
Wall
Figure 35 -
Blower Access Covers
FP2137
Figure 34 -
Blower Wiring Diagram
Junction Box
Blower
Rheostat
T-Stat Sensor
Right
Blower
Left
Blower
White
Black
Hi-Temp
Black
Black
Hi-Temp
Black
Black
Blue
Blue
14. Replace side panels attached to the glass frame
assembly with the louvered side panels provided with
the blower kit by unfastening the four nuts for each
cover door. (Do not overtighten or stud may break
off.) Use three metal clip screws provided with kit to
secure the wire assembly in the front beneath the
access cover. Figure 36
15. Install the speed control (rheostat switch) on the side
above the existing one used for the light (discard the
plate sent with the switch as it will not be needed.
16. Replace logs.
17. Replace the glass.
18. Replace the front plate below the glass frame. NOTE:
The front plate hides the wire harness in the front.
Figure 37 -
Location of White Dial on
Speed Control
Figure 36 -
Install New Louvers
Remove Solid
Access Door
Replace with Louvered Access
Door, Louvers Towards Bottom
FP2234
Loading ...
Loading ...
Loading ...