Loading ...
Loading ...
Loading ...
Cleaning and care
37
Cleaning the water inlet filters
The washing machine has filters to pro-
tect the water inlet valves. You should
inspect the filters approximately every
6months. Perform this check more of-
ten if there are frequent interruptions to
the external water supply.
Cleaning the filter in the inlet hose
First turn off the stopcock.
Unscrew the inlet hose from the stop-
cock.
Remove the rubber seal 1 from the
recess.
Using pointed pliers, take hold of the
plastic filter bar 2 and remove it.
Clean the plastic filter.
Reassemble in reverse order.
Make sure there is no water leaking
from the screw thread.
Tighten the screw thread.
Cleaning the filter in the inlet valve
Using pliers, carefully loosen the
ribbed plastic nut on the inlet valve
and unscrew.
Use pointed pliers to withdraw the
plastic filter by the bar.
Clean the filter.
Reassemble in reverse order.
The filters are used to protect the
water inlet valve.
The filters must be put back in place
after cleaning.
Loading ...
Loading ...
Loading ...