Loading ...
Loading ...
Loading ...
Special features in the programme sequence
32
Spinning
Final spin speed
When a programme is selected, the
maximum spin speed for this wash pro-
gramme is shown in the display.
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart.
Interim spin
There is a spin cycle after the main
wash and between the rinses. A reduc-
tion in the final spin speed will also re-
duce the interim spin speed as appro-
priate.
Omitting the interim spin and the fi-
nal spin
Touch the sensor control.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch on.
Omitting the final spin (Rinse hold)
Touch the sensor control (Rinse
hold).
The laundry is not spun after the final
rinse cycle and remains in the rinse wa-
ter. This helps to prevent creasing if the
laundry is not going to be removed from
the washing machine immediately after
the end of the programme.
Starting the final spin after Rinse
hold
The sensor control for the maximum
spin speed lights up in the control field.
You can change the spin speed. The
Start/Add laundry sensor control
flashes slowly.
Touch the flashing Start/Add laundry
sensor control.
The final spin is carried out.
Ending the programme after Rinse
hold
Reduce the spin speed to .
Touch the Start/Add laundry sensor
control.
The washing machine pumps away the
suds. The programme has finished.
Anti-crease
At the end of the programme, the drum
continues to turn at intervals for up to
30minutes to help prevent creasing.
The washing machine can be opened at
any time.
There is no anti-crease phase at the
end of some programmes.
Loading ...
Loading ...
Loading ...