Loading ...
Loading ...
Loading ...
Bobbin Winding
• Removing bobbin case
Remove the extension table from the machine by pulling it to
the left. Open the shuttle cover _ by pulling down the em-
bossed part on the left of the cover
Raise the needle to its highest position by rotating the
handwheel toward you.
0 Shuttle cover
(_) Bobbin case
To remove the bobbin case (_) from the shuttle, pull open the
latch of the bobbin case. Pul! the bobbin case straight out of
the shuttle°
\
- Bobbin winding
[] Release the clutch by pulling out the handwheeL This
will stop the needle from moving while you wind the
bobbin°
[]
J
[] Drawthread from spool
[] Guide the thread around the thread guide_
[] Thread through the hole in the bobbin from the inside to
the outside.
[] Put the bobbin on the bobbin winder spindle.
[]
[]
[]
18
Loading ...
Loading ...
Loading ...