Loading ...
Loading ...
Loading ...
Lock key
Light switch
Display panel
Temperature increase key
Temperature decrease key
Operation panel
Display Control
When power is rst connected, panel will have full display and unit will beep for 3 seconds.
When in locked state, the display will dim after 30 seconds of no key operation. The display
will recover to normal display with press of any key.
This cooler features touch control on the glass door - only need to touch lightly when pressing the keys. Do not use sharp
objects on the control panel area to prevent scratches. Keep away from high magnetic eld and high humidity or
cooler may not set and operate normally.
Locking and unlocking
When locked, only the light switch will function. All other actions are carried out under Unlocked mode.
To unlock, press and hold the Lock key for 3 seconds. Display panel will ash.
To lock, press and hold the Lock key for 3 seconds.
Switching temperature scale between Fahrenheit and Celsius
To change the temperature display from Fahrenheit to Celsius (or vice versa), press both the Temperature Up
and Down buttons simultaneously.
Temperature setting
Press the Temperature increase key to increase temperature setting by 1°C/1°F.
Press the Temperature decrease key to decrease temperature setting by 1°C/1°F.
Setting range of the Celsius temperature: 5℃~18℃; setting range of the
Fahrenheit temperature: 41 ℉~65℉.
Memory function
This cooler is equipped with Memory IC. When unit restarts after a power failure, unit will automatically
recover at the last setting. During initial startup, unit will be at factory setting.
Error code indication
Fault code
Description
E1
E4
Temperature sensor failure
Defrosting sensor failure
When the above error codes are displayed, please do not attempt to disassemble
the unit and check by yourself. Please contact Sunpentown customer service
for troubleshooting and assistance.
Light
Press the Light Switch to turn the light On or Off.
Temperature Control
6
Loading ...
Loading ...
Loading ...