Loading ...
Loading ...
Loading ...
Before using the wine cooler, remove all packaging materials including bottom
cushions, foam pads and tapes inside the wine cooler. Tear off the
protective lm on the door and the body.
The wine cooler is to be placed in a well-ventilated indoor place; the ground shall
be at and sturdy (rotate left or right to adjust the legs for leveling if
unstable).
restriction to prevent increased power consumption. Keep a minimum clearance of
2 inches all around.
Wipe the wine cooler inside and outside with warm moist cloth (add a small amount of
detergent in the warm water if needed and wipe clean with clean water).
Before initial use, allow the unit to stand upright for at least 30 minutes before
connecting power.
After connecting power, let the unit run 2 to 3 hours before loading wine; during the
summertime when ambient temperature is high, please run at least 4 hours.
Please leave enough space to ensure feasible opening .
Keep away from heat and avoid direct sunlight. Do not place the wine cooler
in moist or humid places to prevent rust or reduction of insulating effect.
The unit expels heat through the side walls. Be sure heat can be exhausted without
2”
2”
2”
Installtion Instruction
Pl ac em ent
5
Loading ...
Loading ...
Loading ...