Loading ...
Loading ...
Loading ...
Step
6
Anti-Tip
Secure
Precautions
R@k&rator
Personal Injury/Property Damage Hazard
case tn”m
The refi-igerator is much heavier at the top. To prevent
to sidepanel
the refrigerator from tipping over you mus~
● Install a wood block, the full width of the refrigera-
tor. Secure the block with wood screws penetrating
at least 3/4” into wall studs.
7
Step
Connect
Water
Supplj
When using 1/2” to 3/4” side panels, the front flange
of the case trim is attached to the side panel.
s Open freezer door to access case trim.
● Drill hole in flange and drive screw through the
flange, into the side panel.
● Follow the same procedure for fresh food side.
—
Side View
Stud
\ /
/
—
—
Side View
OR
If refrigerator is installed between cabinets with no
side panels or in a custom enclosure, install a spacer
block as shown.
● Open freezer door to access case trim.
● Drill hole in trim and drive screw through the trim
and into the spacer block.
● Follow the same procedure for fresh food side.
● Locate and bring copper tubing to front of cabinet.
● Turn water on to flush debris from line, run about
a quart of water through tubing into a bucket, then
shut off water.
\
1’
● Slip a 1/4-1/4 union nut (provided) over both
t--l
IJ
ends of the copper tubing at the right front leg of
~
the refrigerator and couple the lines.
. Turn on water to check for leaks.
L..
!I
9
-—
Loading ...
Loading ...
Loading ...