Loading ...
Loading ...
Loading ...
ASSE BLY
GAUGE WHEEL
MOUNTING
,f" /.
/
\
3/8-I 6 /'
LOCKNUT
3/8" WASHER !!
GAUGE WHEEL.
FIG. 5
INSTALL MULCHER PLATE
(See Figs. 6 & 7)
, tnstai! two latch hooks to mutcher plate using screw,
washer, lock washer, and weld nut as shown.
NOTE: Pre-assembte wetd nut to latch hook by inserting
weld nut from the top with hook pointing down.
. Tighten hardware securely.
- Raise and hold deflector shield in upright position.
o Place front of mulcher ptate over front of mower deck
opening and slide into place, as shown.
° Hook front latch into hole on front of mower deck.
- Hook rear latch into hole on back of mower deck.
WELD NUT FROM THE TOP HOOK POINTS DOWN
WELD
NUT.
LATCH
WASHER
LOCK
WASHER
SCREW \\\_'_-.
J
MULCHER
PLATE
LOCK
WASHER
LATCH
HOOK
WELD
NUT
FIG. 6
9
TO CONVERT TO BAGGING O!:)
D_SCHARG_NG
Simply remove mulcher plate and store in a safe place.
Your mower is now ready for discharging or installation of
optional grass catcher accessory..
DEFLECTOR ................. ',
J
FiG. 7
,/ CHECKMST
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE
THEBES TPERFORMANCE AND SA TISFA C TION FROM
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST:
,/ All assembly instructions have been completed.
¢" No remaining loose parts in carton.
v" Battery is properly prepared and charged. (Minimum
1 hour at 6 arnps).
v" Seat is adjusted comfortably and tightened securely.
,/ All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
v" Be sure mower deck is properly leveled side-to-side/
front4o-rear for best cutting resuits. (Tires must be
properly inflated for leveling).
v" Check rnower and drive belts. Be sure they are routed
properly around pulleys and inside alt belt keepers.
,/ Check wiring. See that at1connections are still secure
and wires are properly clamped.
,/ Before driving tractor, be sure freewheel control is in
drive position.
WHILE LEARNING HOW TO USE YOUR TRACTOR, PA Y
EXTRA A7_ENTtON TO THE FOLLO WfNG IMPORTANT
ITEMS:
,/ Engine oi! is at proper level.
/ Fuel tank is filled with fresh, clean, regular unleaded
gasoiine.
v" Become famitiar with all controls - their location and
function. Operate them before you start the engine.
v" Be sure brake system is in safe operating condition.
,/ It is important to purge the transmission before operat-
ing your tractor for the first time. Follow proper starting
and transmission purging instructions (See "TO START
ENGINE" and "PURGE TRANSMISSION" in the Op-
eration section of this manual).
Loading ...
Loading ...
Loading ...