Loading ...
Loading ...
Loading ...
23
Advice and recommendations for use
i
t
a
l
i
a
n
e
s
p
r
e
s
s
o
d
e
s
i
g
n
-
s
t
a
r
s
/
a
n
d
r
e
a
s
s
e
e
g
a
t
z
®
1 2
i
t
a
l
i
a
n
e
s
p
r
e
s
s
o
d
e
s
i
g
n
-
s
t
a
r
s
/
a
n
d
r
e
a
s
s
e
e
g
a
t
z
®
43
Setting up the machine.
The first time that DIVA is used or if it is used after a long period of inactivity:
1) Fill the tank (2) with cold water.
2) Connect the appliance to a wall socket in strict compliance with the important safeguards specified on
page 20, 21.
3) Switch on the machine by means of the switch (3); the red light on the thermometer will light up (11)
4) Load the water system: open the steam tap by turning the knob (10) counterclockwise and then press
the coffee-delivery switch (4). When water leaves the steam nozzle (8) shut the tap by turning the steam
knob (10) clockwise. Wait for a few minutes so that water runs out of the brewing unit (9) and then stop
water flowing out by using the coffee-delivery switch (4) to switch off the pump.
5) Wait for the hand of the thermometer (6) to reach position in the range shown by the coffee cup symbol
on the thermometer (6) dial.
6) The machine is ready for use.
DiVa is provided with one filter-holder unit (16) with a filter for ESE pods (15), one filter for ground coffee
for 1 cup (18) and one filter for ground coffee for 2 cups (19)
Coffee with pods.
1) Make sure that the thermometer hand is in the position of the coffee cup symbol.
2) Place the filter (18) in the filter-holder unit (16) to pour one cup of coffee and place a pod in it, taking
care to place it perfectly in its seat.
3) Insert the filter-holder unit (16) into the seat of the brewing unit (9) and fix it by rotating the handle
to the right to about the centre of the machine (handle must be rotated until correct pressure for a seal
during delivery is reached).
4) Take one dry and warm coffee cups from the cup-warming surface and place them under the
spout of the filter holder.
Loading ...
Loading ...
Loading ...