Loading ...
Loading ...
Loading ...
22
The original packaging has been designed for dispatch by post. Keep it in case you need to return the machine
to the supplier. Before installing the machine, comply with the important safeguards indicated on page 20, 21.
Connecting to power supply. Always attach plug to appliance first, then plug cord into the wall outlet.
To disconnect, turn all controls OFF, then remove plug from wall outlet. Be aware electric power can
kill. Strictly comply with safety regulations.
The coffee machine must be connected, with the Casa Bugatti original electrical wire (25) to a wall
socket with a voltage as specified on the rating plate underneath the machine. Make sure that the socket
you are using is earthed (grounded).
Never use faulty or damaged power cords.
We do not recommend using an extesion cord with the appliance. This may damage the appliance and void
the warranty.
Never allow live parts to come into contact with water: may cause short circuit!!! Steam and hot water
can cause burns. Never direct the jet of steam or hot water towards parts of the body. Handle the
steam/hot water pipe with care: risk of burns (use a protective glove)!
Do not start up the machine without first filling the tank with water. Take care to insert it carefully in its
seat.
1) When starting up the machine, push the switch (3) to light up the light (11) on the thermometer, which
will show that the machine is on and that the heater resistance is heating up.
2) Then open the tap (10) of the steam nozzle and press the coffee delivery switch (4) to facilitate pump
priming. Pump priming has occurred when water comes out of the steam nozzle.
3) Shut the steam tap (10) and keep the coffee-delivery switch (4) pressed until water flows out from the
brewing unit (9).
4) Turn off the coffee delivery switch 4 : the operation has finished.
5) Always make sure that there is water in the tank (2) and that the suction pipe is correctly inserted.
Warning: the pump will be irreparably damaged if the machine operates without water even for a short
period.
6) Every time you add water into the tank (2), remember to empty the waste water tank located under the
drip grid (14).
Installation and starting up
i
t
a
l
i
a
n
e
s
p
r
e
s
s
o
d
e
s
i
g
n
-
s
t
a
r
s
/
a
n
d
r
e
a
s
s
e
e
g
a
t
z
®
1
5
i
t
a
l
i
a
n
e
s
p
r
e
s
s
o
d
e
s
i
g
n
-
s
t
a
r
s
/
a
n
d
r
e
a
s
s
e
e
g
a
t
z
®
2
i
t
a
l
i
a
n
e
s
p
r
e
s
s
o
d
e
s
i
g
n
-
s
t
a
r
s
/
a
n
d
r
e
a
s
s
e
e
g
a
t
z
®
3
Loading ...
Loading ...
Loading ...