Loading ...
Loading ...
Loading ...
Rapid heating en
13
10 Rapid heating
To save time, rapid heating can shorten the preheating
time for set temperatures over 100°C.
Rapid heating is possible for the following types of
heating:
¡ CircoTherm hot air
¡ Bread baking setting
¡ Top/bottom heating
10.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note:Do not set a cooking time until rapid heating has
come to an end.
1.
Set a suitable type of heating and a temperature of
at least 100°C.
Rapid heating automatically switches off at temper-
atures of 200°C and above.
2.
If rapid heating does not switch off automatically,
press the
button.
a
appears in the display and the arrows are filled
from the bottom to the top.
a Rapid heating starts after a few seconds.
a Once rapid heating has ended, a signal tone
sounds and the
symbol goes out on the display.
3.
Place the food in the cooking compartment.
Cancelling rapid heating
▶
Press the
button.
a The
symbol disappears from the display.
11 Sabbath mode
You can set a time of over 70hours using Sabbath
mode. You can use Top/bottom heating to keep food
warm between 85°C and 140°C during this time
without having to switch the appliance on or off.
11.1 Starting Sabbath mode
Notes
¡ If you open the appliance door during operation, the
appliance does not interrupt the operation.
¡ Once it has started, you can no longer change or in-
terrupt Sabbath mode.
¡ You cannot delay the end time for Sabbath mode.
Requirement:Sabbath mode is activated in the basic
settings.
→"Basic settings", Page13
1.
Use the function selector to set the type of heating
.
a
appears in the display.
2.
Use the temperature selector to set the temperature.
3.
Use the or button to set the time.
a After a few seconds, the appliance starts heating
and the cooking time counts down.
4.
Once the time has elapsed, the display shows the
time as zero. The appliance stops heating up and
responds again as usual outside of Sabbath mode.
‒ Switch off the appliance.
The appliance automatically switches off after ap-
prox.10to 20 minutes.
12 Basic settings
You can configure the basic settings for your appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display Basic setting Selection
Automatic childproof lock
→"Childproof lock", Page12
= no
1
= yes
Signal duration upon completion of a cook-
ing time or timer period
= 10 seconds
= 30 seconds
1
= 2 minutes
Waiting time until a setting is adopted = 3 seconds
1
= 6 seconds
= 10 seconds
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...