Loading ...
Loading ...
Loading ...
(HDMI-CEC) isn°t working°
Confirm that the device is an Anynet+ device. The Anynet+ system supports
Anynet+ devices only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to System and see if Anynet+ (HDMI-CEC) has been set to On.
Check whether the TV remote control is in TV mode.
Anynet+ does not Check whether the remote control is Anynet+ compatible.
work. Anynet+ may not function when some other functions are active, including Channel
Search, Smart Hub, Start Up, etc.
if you have disconnected and then reconnected the HDMI cable, scan for devices
again or turn your TV off and on.
HDM_ UHD Color is specific to a UHD source, and does not operate properly for
any other source. In this case, navigate Picture > Picture Options > HDM_ UHD
Co,or menu, and then set the HDMJ UHD Color-enabled HDMI connector to Off.
Check if the Anynet+ device is properly connected to the TV, and then navigate to
the System menu to see if Anynet+ (HDMPCEC) is set to On.
Once you have verified that Anynet + is on:
On the Samsung Smart Control press the KEYPAD button, and then select
I want to start
Anynet+. the T OOILS button on the On-Screen Remote, A Ist appears, Seect Anynet+
(HDMI-CEC) from the list, and then a dev ce,
On a standard remote, press the TOOLS button. A 1st appears. Select
Anynet+ (HDMPCEC) from the list, and then a device.
I want to exit Anynet+ Select View TV from the Anynet+ menu.
" Select a non-Anynet+ device from the Source list.
The message
"Connecting to
You cannot use the remote control when you are configuring Anynet+ or switching
Anynet+ dev'ce... '
to a viewing mode. Use the remote control after the TV has completed the Anynet+
or "Disconnecting
from Anynet+ device" configuration or has switched to a viewing mode.
appears on the screen.
The Anynet+ device
won't play. You cannot use the play function when Setup is in progress.
Check whether the device supports Anynet+.
Check whether the HDMI cable is properly connected.
Go to System and see if Anynet+ (HDMI=CEC) has been set to On.
Scan for Anynet+ devices again.
The connected device Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the
is not displayed, device is connected to your TV with an HDMI cable. Some HDMI cables may not
support Anynet+.
If the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please scan for the device again.
The TV audio is not Connect an optical cable to the TV and the receiver.
being played through ARC enables the TV to output digital sound via the HDMI (ARC) port.
the receiver. However, ARC is only available when the TV is connected to an audio receiver that
:i supports ARC.
Loading ...
Loading ...
Loading ...