Loading ...
Loading ...
Loading ...
49-50322
Installation Instructions
INSTALLATION INSTRUCTIONS
Filtration Drain Connection
PREFERRED INSTALLATION:
OPTION A—BASEMENT ACCESS
INSTALLATION
Route the drain line DIRECTLY from the
Reverse Osmosis system to a standpipe in
the basement, bypassing the air gap provided
in the faucet. The air gap installation is left to
the discretion of the installer. The drain line
may also be routed to a floor drain or washtub,
provided that the air gap is maintained. Special
air gap fittings are available to connect the drain
line to the top of the standpipe.
Check and comply with local plumbing codes as you plan.
CAUTION
The options detailed below are the ONLY approved installation
configurations. Do not use any drain saddle device.
NOTE: Failure to follow these Installation Instructions will void the warranty, and the installer
will be responsible for any service, repair or damages caused thereby.
Drain line from the Reverse Osmosis system
1”
1” minimum air gap
must be maintained
PREFERRED INSTALLATION:
OPTION B—DRY-VENTED P-TRAP
INSTALLATION
Install a separate dry-vented p-trap under the
sink to be used exclusively for the Reserve
Osmosis drain line. A dry-vented p-trap is a
p-trap that has its own vent/stack. Attach the
drain line adapter to the p-trap and secure it
with the slip joint nut and washer as shown. The
drain line MUST be routed through the air gap
provided in the RO water faucet.
Reverse
Osmosis
drain line
Optional disposer
Loading ...
Loading ...
Loading ...