Loading ...
Loading ...
Loading ...
This page for tractors with 54" mower decks only.
• Remove and store the mower stop bracket and bolt
from both sides of the tractor frame. See figure 3.
• Remove the two bolts from the bottom of the foot
rests on both sides of the tractor frame. See figure
7.
54" MOWER DECKS
MOWER STOP
BRACKET
• Assemble the 54" L.H. hanger bracket to the holes
where the mower stop bracket was removed on the
left side of the tractor frame. Fasten with two 3/8" x
1" hex bolts, two 3/8" lock washers and two 3/8"
hex lock nuts. See figure 9.
54" MOWER DECKS
L.H. HANGER
BRACKET (54")
\
3/8" x 1"
HEX BOLT
3/8" LOCK
WASHER
3/8" HEX
LOCK NUT
FIGURE 9 LEFT SIDE VIEW
FIGURE 7 RIGHT SIDE VIEW
Assemble the 54" R.H. hanger bracket to the holes
where the mower stop bracket was removed on the
right side of the tractor frame. Fasten with two 3/8"
x 1" hex bolts, two 3/8" lock washers and one 3/8"
hex lock nut. See figure 8.
54" MOWER DECKS
3/8" HEX
LOCK NUT
3/8"LOCK
WASHER
R.H. HANGER
BRACKET (54")
318" x 1" 3/8" LOCK
HEX BOLT WASHER
!
318"x 1"
HEX BOLT
FIGURE 8 RIGHT SIDE VIEW
• Assemble a frame bracket to the L.H. foot rest as
shown in figure 10. Use two 3/8" x 1-1/4" hex bolts,
four spacers (2 per bolt) and two 3/8" lock washers.
• Assemble a shoulder bolt to the inside of the frame
bracket, securing it with a 3/8" lock washer and a
3/8" hex lock nut. See figure 10.
• Repeat with a frame bracket on the R.H. side of the
tractor.
FRAME
BRACKET
54" MOWER DECKS
3/8" x 1-1/4" 3/8" HEX
HEX BOLT LOCK NUT
3/8" LOCK
3/8" LOCK WASHER
WASHER
(2) SPACERS
8
FIGURE 10
SHOULDER
BOLT
LEFT SIDE VIEW
Loading ...
Loading ...
Loading ...