Loading ...
Loading ...
Loading ...
16
Problems
The dishes are not
clean
Cloudiness on
glassware
Black or gray marks
on dishes
Detergent left in
dispenser cups
The dishes are not
drying
The dishes are not
loaded correctly.
The program is not
powerful enough.
Not enough detergent
is dispensed.
Items are blocking the
path of spray arms.
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cup opens.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program has
been selected
Use of cutlery with a
low-quality coating
Codes Meanings Possible Causes
The lter combination
is not clean or is not
correctly tted.
This may cause the
spray arm jets get
blocked.
Unsatisfactory
washing result
Unsatisfactory
drying result
See notes in "Loading the Dishwasher Baskets ".
Select a more intensive program.
See" Washing Cycle Table ".
Use more detergent, or change your detergent.
Rearrange the items so that the sprayer can rotate freely.
Use less detergent if you have soft water and select a shortest
cycle to wash the glassware and to get them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the instructions.
Increase the amount of rinse-aid/rell the rinse-aid dispenser.
Do not empty your dishwasher immediately after washing. Open
the door slightly so that the steam can escape. Begin unloading
the dishwasher only when the dishes are barely warm by
touching. Empty the low basket rst. This prevents water form
dropping from dishes in the upper basket.
In short program, the rinse temperature is lower.
This also lowers cleaning performance. Choose a program with a
long high rinse temperature.
Water drainage is more difcult with these items.
Cutlery or dishes of this type are not suitable for washing in the
dishwasher.
When some malfunctions occur, the appliance will display error codes to warn you:
If overow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overll or small leak, the water should be removed before restarting
the dishwasher.
E1 Longer inlet time.
The faucet is not opened, water intake is restricted, or water
pressure is too low.
Not reaching required temperature. Malfunction of heating elements.
Overow.
WARNING!
Some element of dishwasher leaks.
E3
E4
Clean and/or t the lter combination correctly.
Clean the spray arm jets. See "Cleaning the Spray Arms".
Possible Causes What to Do
Before Calling for Service
Loading ...
Loading ...