Loading ...
Loading ...
Loading ...
13
Drain Hose Connection
Cold Water Connection
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure it will not be bent
or crimped. The top of the hose must be less than 1000mm.
Counter
Front
NOTE
The top of the hose
must be less than
1000mm.
Drain Pipe
40mm
MAX 1000mm
WARNING!
WARNING!
Improper connection of the equipment grounding conductors can result in the risk of an electric shock.
Check with a qualied electrician or service representative if you are in doubt whether the appliance is
properly grounded.
Do not modify the plug provided with the appliance. If the plug does not t properly to the outlet, please
have a qualied electrician to install a proper outlet.
Connect the cold water supply hose to a threaded 3/4 (inch) connector and make sure that it
is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the water
run to make sure that the water is clear. This precaution is needed to avoid the risk of the
water inlet being blocked and damaging the appliance.
Please close the hydrant after using.
Water Connection
PLEASE HANG UP THE DRAIN HOSE IN EITHER WAY OF A, B
Loading ...
Loading ...
Loading ...