Loading ...
Loading ...
Loading ...
6 User settings
If a connection between the hob and the range hood was successfully established, it
must be confirmed on the hob as follows:
▸ Hold the button depressed for 2seconds.
– The setting is saved and the user settings are closed.
– The appliances are connected and OptiLink is active.
5.2 Deactivating OptiLink
Terminating the connection between the range hood and the hob:
▸ Access the user setting (see page 19).
▸ Select the user setting.
▸ Touch or swipe slider 1 to select the setting.
▸ Hold the button depressed for 2seconds.
– The setting is saved and the user settings are closed.
– OptiLink is deactivated.
See the operating instructions for the range hood for terminating OptiLink.
6 User settings
The following user settings can be set and saved individually:
User setting Setting value Factory
setting
Acoustic signal loudness Low
Medium
High
Acoustic signal at end of
operating time / timer
No acoustic signal
Automatically off after 10seconds
Automatically off after 1minute
Operating time
PowerPlus
Ends after 5minutes
Ends after 10minutes
Ends after 15minutes
Automatic boost Automatic boost off
Automatic boost on
Default operating time /
timer duration
Default duration 0minutes
Adjustable in steps from
10–90minutes
Acoustic signal when
buttons are pressed
Acoustic signal off
Acoustic signal on
Cancel wipe protection To switch wipe protection off: Touch
the button
Automatically off after 30seconds
18
Loading ...
Loading ...
Loading ...