5KSM150PSCER0 User Manual

Loading ...

Using Your KitchenAid ®Fiat Beater,

Wire Whip and Dough Hook

Flat Beater for normal to heavy mixtures:

cakes biscuits

quick breads candies

cookies mashed potatoes

Wire Whip for mixtures that need air incorporated:

eggs sponge cakes

angel food cakes heavy cream

boiled frostings some candies

Dough Hook for mixing and kneading yeast doughs:

breads coffee cakes

buns pizza dough

creamed frostings

meat loaf

pie pastry

egg whites

mayonnaise

rolls

Beater to Bowl Clearance

Your Stand Mixer is adjusted at the factory so the flat beater just clears the bottom of

the bowl. If, for any reason, the flat beater hits the bottom of the bowl or is too far

away from the bowl, you can correct clearance easily.

Tilt Head Stand Mixers:

1. Turn speed control to "O."

2. Unplug Stand Mixer.

3. Lift motor head.

4. Turn screw (A) SLIGHTLYcounter-

clockwise (left) to raise flat beater or

clockwise (right) to lower flat beater.

5. Make adjustment with flat beater, so it

just clears surface of bowl. If you over

adjust the screw, the bowl lock lever

may not lock into place.

NOTE: When properly adjusted, the flat

beater will not strike on the bottom or

side of the bowl. If the flat beater or the

wire whip is so close that it strikes the

bottom of the bowl, coating may wear off

the beater or wires on whip may wear.

Bowl-Lift Stand Mixers:

1. Turn speed control to "O."

2. Unplug Stand Mixer.

3. Place bowl-lift handle in down

position.

4. Attach flat beater.

5. Turn screw (B) SLIGHTLYcounter-

clockwise (left) to raise flat beater or

clockwise (right) to lower flat beater.

6. Place bowl-lift handle in up position to

check clearance.

7. Repeat steps 5 and 6 if necessary.