Loading ...
Loading ...
Loading ...
Cleaning and maintenance
156
9. Touch the HOME button to exit from
the function.
10. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
11. Use a non-scratch sponge with brass
filaments on hard to remove deposits.
12. In case of grease residues use specific
oven cleaning products.
13. Remove the residual water inside the
oven.
For improved hygiene and to avoid food
being affected by any unpleasant odours,
we recommend that the oven is dried using
a fan-assisted function at 160°C for
approximately 10 minutes.
What to do if...
The display is completely off:
• Check the mains power supply.
• Check that any circuit breakers upline of
the appliance supply line are in the
“ON” position.
The appliance does not heat up:
• Check whether ”Showroom (for
showrooms only)” or ”Demo Mode (for
showrooms only)” mode has been set
(for further details see section ”Settings”).
The controls do not respond:
• Check whether ”Controls lock” mode
has been set (for further details see
section ”Settings”).
After the (pyrolytic) automatic cleaning
cycle it is not possible to select a function:
• Verify whether the door lock has
deactivated. If it has not, the oven has a
safety device that does not allow
functions to be selected while the door
lock is active. This is because the
temperature inside the oven is still too
high to permit any type of cooking.
We recommend wearing rubber
gloves for these operations.
We recommend removing the
door in order to make the manual
cleaning of the parts that are
difficult to reach easier.
Loading ...
Loading ...
Loading ...