Loading ...
Loading ...
Loading ...
47
4 Permanent settings in programming mode
pt
es
nl
it
fr
ru
en
de
E If milk has been prepared, you will be
prompted to clean the milk system (‘Do you
want to clean the milk system now?’). After
10seconds the switch-off process continues
automatically.
‘Machine is rinsing’, the system rinses itself.
The operation stops automatically. Your ENA
is switched off.
4 Permanent settings in pro-
gramming mode
Press the ‘P’ button for approximately 2seconds to
enter programming mode. You can easily navigate
through the programme items and permanently
save the required settings using the multi-function
buttons. The following settings can be made:
Programme
item
Sub-item Explanation
‘Maintenance
status’
‘Clean’,
‘Clean the milk system’,
‘Descale’,
‘Filter’ (only if filter is fitted),
‘Rinse’,
‘Maintenance information’
T Here you can start the required maintenance
programme or find out what maintenance actions are
required.
‘Product
settings’
T Select your settings for speciality coffees and hot
water.
‘Machine
settings’
‘Switch off after’
T Set the time after which the ENA should switch off
automatically.
‘Save energy’
T Activate energy-saving mode.
‘Factory setting’
TReset the machine to its factory setting.
‘Units’
T Select the unit for the amount of water.
‘Water hardness’
T You can set the water hardness of the water used.
‘Choose language’
T Select your language.
‘Connect accessory’,
‘Disconnect accessories’
(Only displayed if the JURA
Smart Connect is being used.)
T Connect the ENA wirelessly to a JURA accessory or
disconnect the connection again.
‘Version’ Software version
Loading ...
Loading ...
Loading ...