pt
es
nl
it
fr
ru
en
de
ENA 8 Instructions for Use
34
Table of contents
Your ENA 8
Control elements 36
Important information 38
Proper use ...............................................................................................................................................................38
For your safety .......................................................................................................................................................38
1 Preparing and using for the first time 40
JURA on the Internet ............................................................................................................................................ 40
Setting up the machine ....................................................................................................................................... 40
Filling the bean container ................................................................................................................................... 40
Determining the water hardness ........................................................................................................................ 41
First-time use .......................................................................................................................................................... 41
Connecting milk .....................................................................................................................................................42
Connecting an accessory (via Bluetooth) ..........................................................................................................42
2 Preparation 43
Espresso, coffee and other speciality coffees ...................................................................................................43
Latte macchiato, cappuccino and other speciality coffees with milk ...........................................................43
Ground coffee ........................................................................................................................................................ 44
Adjusting the grinder ........................................................................................................................................... 45
Hot water................................................................................................................................................................ 45
3 Daily operation 45
Filling the water tank ........................................................................................................................................... 45
Switching on the machine .................................................................................................................................. 46
Daily maintenance ................................................................................................................................................ 46
Regular maintenance ........................................................................................................................................... 46
Switching off the machine .................................................................................................................................. 46
4 Permanent settings in programming mode 47
Adjusting the product settings .......................................................................................................................... 48
Automatic switch-off ............................................................................................................................................ 48
Energy-saving mode ............................................................................................................................................ 49
Restore factory settings ....................................................................................................................................... 49
Unit for amount of water .................................................................................................................................... 49
Setting the water hardness ................................................................................................................................. 49
Language ................................................................................................................................................................ 50
5 Maintenance 50
Rinsing the machine ............................................................................................................................................ 50
Automatic milk system rinsing ........................................................................................................................... 51
Cleaning the milk system ..................................................................................................................................... 51
Dismantling and rinsing the dual spout ............................................................................................................52
Inserting/changing the filter ................................................................................................................................53
Cleaning the machine .......................................................................................................................................... 54
Descaling the machine ....................................................................................................................................... 54
Descaling the water tank ..................................................................................................................................... 56
Cleaning the bean container .............................................................................................................................. 56
35
pt
es
nl
it
fr
ru
en
de
Table of contents
Symbol description
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention to
potential serious injury, and the signal word CAUTION to potential minor injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
T
Prompt to take action. This symbol means that you are being prompted to perform some
action.
E
Information and tips to make it even easier to use your ENA.
‘Coffee’ Display
6 Display messages 57
7 Troubleshooting 58
8 Transport and environmentally friendly disposal 59
Transport/ Emptying the system ...................................................................................................................... 59
Disposal .................................................................................................................................................................. 59
9 Technical data 59
10 Index 60
11 JURA contact details/ Legal information 62
36
Control elements
Control elements
2
1
7
8
9
10
3
6
5
4
1 Display
2 Mains cable (back of the machine)
3 Height-adjustable dual spout
4 Coffee grounds container
5 Drip tray
6 Cup grille
7 Water tank (with cover)
8 Multi-function buttons (button function
depends on what is shown in the display)
9 Hot-water spout
10 Insert for drip tray
37
Control elements
pt
es
nl
it
fr
ru
en
de
1
2
3
4
1 Bean container with aroma preservation cover
2 Powder chute for ground coffee
3 On/Off button Q
4 Grinding wheel
Back of the machine: Service socket for JURA Smart Connect (behind cover). Smart Connect is not
included with all models.
Accessories
Filler funnel for ground coffee Measuring spoon for ground
coffee
Container for milk system
cleaning
6
38
Important information
Important information
Proper use
The machine is designed and
intended for private domestic use.
It should only be used for coffee
preparation and to heat milk and
water. Use for any other purpose
will be deemed improper. JURA
Elektroapparate AG cannot accept
any responsibility for the conse-
quences of improper use.
Before using the machine read
these instructions for use thor-
oughly and completely and comply
with the instructions they contain.
A warranty service is not applicable
for damage or defects caused by
non-compliance with the instruc-
tions for use. Keep these instruc-
tions for use close to the machine
and pass them on to the next user.
For your safety
Please carefully read and observe
the important safety information
set out below.
To avoid danger of potentially fatal
electric shock:
U
Never use a machine which is
damaged or has a defective
mains cable.
U
In the event of signs of damage,
for example if there is a smell
of burning, unplug the machine
immediately from the mains
supply and contact JURA service.
U
If the mains cable of this
machine is damaged, it must be
repaired either directly by JURA
or by an authorised JURA service
centre.
U
Make sure that the ENA and the
mains cable are not located close
to hot surfaces.
U
Be careful to ensure that the
mains cable is not trapped and
does not rub against sharp
edges.
U
Never open and repair the
machine yourself. Do not modify
the machine in any way that is
not described in these instruc-
tions for use. The machine
contains live parts. If opened,
there is a danger of potentially
fatal injury. Repairs may only be
carried out by authorised JURA
service centres, using original
spare parts and accessories.
U
To completely and safely discon-
nect the machine from the
power supply, first switch off the
ENA using the On/Off button Q.
Only then should you remove
the mains plug from the power
socket.
There is a risk of scalds or burns on
the spouts.
39
Important information
pt
es
nl
it
fr
ru
en
de
U
Place the machine out of the
reach of children.
U
Do not touch any hot parts.
Use the handles provided.
U
Be careful to ensure that the dual
spout is correctly installed and
clean. If it is incorrectly fitted or
becomes blocked, its parts might
come off. There is a danger of
parts being swallowed.
A defective machine is not safe and
could cause injury or fire. To avoid
damage and any associated risk of
injury or fire:
U
Never allow the mains cable to
loosely hang down. The mains
cable could pose a tripping
hazard or become damaged.
U
Protect the ENA from environ-
mental influences such as rain,
frost and direct sunlight.
U
Do not immerse the ENA, mains
cable or connections in water.
U
Do not put the ENA or any
individual parts in the dish-
washer.
U
Do not use alkaline cleaning
agents; only use a soft cloth and
mild cleaning agents.
U
Switch your ENA off at the power
switch before any cleaning opera-
tion. Always wipe the ENA with a
damp cloth rather than a wet
one, and protect it from pro-
longed exposure to water splash.
U
Only connect the machine to
the mains voltage in accordance
with the information on the rating
plate. The rating plate is located
on the underside of your ENA.
Further technical data is provided
in these instructions for use (see
Chapter 9 ‘Technical data’).
U
Please only use original JURA
maintenance products. Use of
products that are not explicitly
recommended by JURA could
damage the machine.
U
Do not use any coffee beans
treated with additives or
caramelised coffee beans.
U
Only fill the water tank with
fresh, cold water.
U
Switch the machine off with the
On/Off button Q if you are going
to be absent for a longer period
of time and remove the mains
plug from the power socket.
U
Children may not clean or ser-
vice the machine unless super-
vised by a responsible person.
U
Do not allow children to play
with the machine.
U
Keep children under the age of 8
away from the machine, or
supervise them constantly.
U
Children aged 8 and over may
only operate the machine
without supervision if they have
been instructed in how to use it
40
1 Preparing and using for the first time
safely. Children must be able to
recognise and understand the
potential dangers arising from
incorrect use.
People, including children, who
U
do not have the physical,
sensory or mental capabilities
to use the machine safely or
U
are inexperienced or lack knowl-
edge in how to use the machine
safely
must be supervised by a responsible
person when using it, or must be
instructed in how to use it correctly.
Safety when handling the CLARIS
Smart / Smart mini filter cartridge:
U
Filter cartridges should be kept
out of the reach of children.
U
Store filter cartridges in a dry
place in the sealed packaging.
U
Protect cartridges from heat and
direct sunlight.
U
Do not use damaged filter
cartridges.
U
Do not open filter cartridges.
U
The CLARIS Smart / Smart mini
filter cartridge communicates
with your ENA via RFID technol-
ogy (frequency band 13.56 MHz).
This wireless connection is only
used for a maximum of 3 sec.
during preparation. In this case,
the maximum transmission
power is below 1 mW.
1 Preparing and using for the
first time
JURA on the Internet
Visit us on the Internet.
On the JURA website (jura.com) you will find inter-
esting and up-to-date information on your ENA
and on every aspect of coffee.
Setting up the machine
When setting up your ENA, please note the
following:
U
Place the ENA on a horizontal surface that is
not sensitive to water.
U
Choose a spot for your ENA which protects the
machine against overheating. Ensure that the
ventilation slots are not covered.
Filling the bean container
The bean container has an aroma preservation
cover. This will ensure that your coffee beans retain
their aroma for longer.
CAUTION
Coffee beans which have been treated with
additives (e.g. sugar), ground coffee or freeze-dried
coffee will damage the grinder.
T Only use roasted, untreated coffee beans to
fill the bean container.
T Remove the aroma preservation cover.
T Remove any dirt or foreign objects from
inside the bean container.
T Fill the bean container with coffee beans and
close the aroma preservation cover.
41
1 Preparing and using for the first time
pt
es
nl
it
fr
ru
en
de
Determining the water hardness
When you use the machine for the first time, you
must set the water hardness. If you do not know
the hardness of your water, you can find this out
first. Use the Aquadur® test strips supplied with
the machine.
T Hold the test strip briefly (for 1second)
under flowing water. Shake off the water.
T Wait for about 1minute.
T You will then be able to read the degree of
water hardness from the discolouration of
the Aquadur® test strip and the description
on the packaging.
First-time use
J
WARNING
If the machine is operated with a defective mains
cable, there is a danger of potentially fatal electric
shock.
T Never use a machine which is damaged or
has a defective mains cable.
CAUTION
Milk, sparkling mineral water or other liquids can
damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
Precondition:The bean container has been filled.
T Insert the mains plug into a power socket.
T Press the On/Off button Q to switch the ENA
on.
‘Choose language’
E To display more languages, press the ‘’
button.
T Press the button that corresponds to the
language you want, e.g. ‘English’.
‘Saved’ appears briefly on the display to
confirm the setting.
‘Water hardness’
E If you do not know the hardness of your
water, you must find this out first (see
Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Press the ‘<’ or ‘>’ button to change the
setting for the water hardness.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Filter operation’ / ‘Insert filter’
T Place a receptacle under the dual spout and
the hot-water spout.
T Remove the water tank and rinse it with cold
water.
T Fit the filter cartridge extension supplied on
top of the CLARIS Smart mini filter cartridge.
42
1 Preparing and using for the first time
T Insert the filter cartridge with its extension
into the water tank.
T Fill the water tank with fresh, cold water and
reinsert the tank.
E The machine automatically detects that you
have just inserted the filter cartridge.
‘Saved’
‘Filter is being rinsed’, the filter is rinsed.
Water flows directly into the drip tray.
E If the ‘Empty drip tray’ message appears,
empty the drip tray and put it back into the
machine.
‘System is filling’
‘Machine is heating’
‘Machine is rinsing’
The rinse stops automatically. The start
screen is displayed. Your ENA is ready for
use.
E If the filter is active, this is indicated by a
blue filter symbol at the bottom of the
display.
Connecting milk
Your ENA creates fine, creamy, feather-light milk
foam with a perfect consistency. The most
important requirement for frothing milk is a milk
temperature of 4–8°C. We would therefore
recommend using a milk cooler or a milk
container.
click! click!
T Remove the protective cover from the dual
spout.
T Connect the milk pipe to the dual spout.
T Connect the other end of the milk pipe to a
milk container or a milk cooler.
Connecting an accessory (via Bluetooth)
You have the option of connecting your ENA
wirelessly to a compatible accessory (e.g. the Cool
Control Wireless milk cooler). To do this, the
receiver of the Cool Control or the JURA Smart
Connect must be plugged into the service socket.
A frequency band of 2.4 GHz is used for this
wireless connection. In this case, the maximum
transmission power is below 1 mW.
E The Smart Connect can be protected
against unauthorised access using a PIN.
Activate the PIN function via the JURA app.
You will find more information at
jura.com/smartconnect.
E Please note that you can only connect either
the Cool Control or only one JURA app to the
coffee machine via Smart Connect.
Precondition:The start screen is displayed.
43
2 Preparation
pt
es
nl
it
fr
ru
en
de
T Press the ‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘’ button.
T Press the ‘Machine settings’ button.
T Press the ‘’ button several times until page
‘4/5’ is displayed.
T Press the ‘Connect accessory’ button.
‘Connect accessory’
T Now follow the instructions on the display to
connect the accessory to the ENA.
2 Preparation
Basic information about preparing drinks:
U
During the grinding operation you can change
the coffee strength by pressing the ‘<’ and
‘>’ buttons.
U
During preparation you can change the preset
amounts (e.g. water and amount of milk
foam) by pressing the ‘<’ and ‘>’ buttons.
U
If you have selected settings during prepara-
tion, you can save these changes after
preparation. To do this, press the ‘Save’
button.
U
You can stop preparation at any time. To do
this, press the ‘Cancel’ button.
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialised dealer.
You can make permanent settings for all products
in programming mode (see Chapter 4 ‘Permanent
settings in programming mode – Adjusting the
product settings’).
Espresso, coffee and other speciality
coffees
Ristretto, espresso and coffee are all prepared
following this model.
Two brewing operations are carried out for the
espresso doppio to create a particularly full-bodied
and aromatic speciality coffee.
Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed.
T Place a cup under the dual spout.
T Press the ‘Coffee’ button.
Preparation starts. ‘Coffee’ and the coffee
strength are displayed. The preset amount
of water for coffee flows into the cup.
Preparation stops automatically. Your ENA is
once more ready for use.
Latte macchiato, cappuccino and other
speciality coffees with milk
Your ENA prepares latte macchiato, cappuccino
and other speciality coffees with milk at the touch
of a button. There is no need to move the glass or
cup.
Example:Proceed as follows to prepare one latte
macchiato.
Precondition:The start screen is displayed. Milk is
connected to the dual spout.
T Place a glass under the dual spout.
T Press the ‘’ or ‘’ button the number of
times needed to display page ‘2/5’.
44
2 Preparation
T Press the ‘Latte macchiato’ button.
‘Latte macchiato’, the preset amount of milk
foam flows into the glass.
E There is a short interval while the hot milk
separates from the milk foam. This allows
the typical layers of a latte macchiato to
form.
Coffee preparation starts. The preset
amount of water for espresso flows into the
glass. Preparation stops automatically.
Your ENA is once more ready for use.
E 15 minutes after preparation, the milk
system is automatically rinsed (see
Chapter 5 ‘Maintenance – Automatic milk
system rinsing’). Therefore always place a
receptacle under the dual spout after
preparing milk.
To ensure that the milk system in the dual spout
always works properly, you must clean it daily
(see Chapter 5 ‘Maintenance – Cleaning the milk
system’).
Ground coffee
You can choose to use a second coffee variety, for
example decaffeinated coffee, with the filter funnel
for ground coffee.
Basic information about ground coffee:
U
Never add more than one level measuring
spoon of ground coffee.
U
Use ground coffee which is not ground too
finely. Very fine coffee can block up the system
so that the coffee only comes out in drips.
U
If you did not fill the machine with a sufficient
amount of ground coffee, ‘Not enough ground
coffee’ is displayed and the ENA stops the
operation.
U
The desired speciality coffee must be prepared
within approximately one minute after filling
with the ground coffee. Otherwise the ENA
stops the operation and is once more ready for
use.
All speciality coffees with ground coffee are always
prepared following the same model.
Example:Proceed as follows to prepare one
espresso using ground coffee.
Precondition:The start screen is displayed.
T Place an espresso cup under the coffee
spout.
T Open the powder chute for ground coffee.
‘Ground coffee’ / ‘Please add ground coffee’
T Fit the filler funnel for ground coffee.
T Place one level measuring spoon of ground
coffee into the filler funnel.
T Remove the filler funnel and close the cover
of the powder chute.
T Press the ‘Espresso’ button.
Preparation starts. ‘Espresso’, the preset
amount of water for espresso flows into the
cup.
Preparation stops automatically. Your ENA is
once more ready for use.
45
3 Daily operation
pt
es
nl
it
fr
ru
en
de
Adjusting the grinder
You can adjust the grinder to suit the degree of
roast of your coffee.
CAUTION
If you adjust the consistency of grind when the
grinder is not operating, the grinding wheel could
be damaged.
T Only adjust the consistency of grind when
the grinder is running.
The consistency of grind is correct if the coffee
flows regularly from the coffee spout. In addition a
fine, thick crema forms.
Grinding wheel (see image)
U
1: Coarse consistency of grind setting
U
2: Fine consistency of grind setting
Example:Proceed as follows to change the
consistency of grind during the preparation of an
espresso.
T Place a cup under the dual spout.
T Press the ‘Espresso’ button.
T Turn the grinder adjustment wheel to the
desired position while the grinder is
running.
The preset amount of water flows into the
cup. Preparation stops automatically. Your
ENA is once more ready for use.
21
Hot water
J
CAUTION
There is a danger of scalding from hot water
splashes.
T Avoid direct contact with the skin.
Precondition:The start screen is displayed.
T Place a cup under the hot-water spout.
T Press the ‘’ or ‘’ button the number of
times needed to display page ‘5/5’.
T Press the ‘Hot water’ button.
‘Hot water’, the preset amount of water
flows into the cup.
Preparation stops automatically. Your ENA is
once more ready for use.
3 Daily operation
Filling the water tank
Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
CAUTION
Milk, sparkling mineral water or other liquids can
damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
T Remove the water tank and rinse it with cold
water.
T Fill the water tank with fresh, cold water and
reinsert the tank.
46
3 Daily operation
Switching on the machine
T Place a receptacle under the dual spout.
T Press the On/Off button Q to switch the ENA
on.
‘Welcome to JURA’
‘Machine is heating’
‘Machine is rinsing’
The rinse stops automatically. Your ENA is
ready for use.
Daily maintenance
To ensure that you get many years of reliable
service out of your ENA and to guarantee the
optimum coffee quality, the machine requires daily
maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the
drip tray. Rinse them both with warm water.
E Always empty the coffee grounds container
when the machine is switched on. This is
the only way of resetting the coffee grounds
counter.
E The insert for the drip tray, including the drip
tray itself, and the coffee grounds container
are dishwasher-safe.
T Refit the coffee grounds container and the
drip tray.
T Rinse the water tank with clean water.
T Clean the milk system in the dual spout
(see Chapter 5 ‘Maintenance – Cleaning the
milk system’).
T Remove the milk pipe and rinse it
thoroughly under running water.
T Dismantle and rinse the dual spout
(see Chapter 5 ‘Maintenance – Dismantling
and rinsing the dual spout’).
T Wipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfibre cloth).
Regular maintenance
Carry out the following maintenance actions
regularly or as required:
U
In the interests of hygiene, we recommend
changing the milk pipe and interchangeable
milk spout on a regular basis (approximately
every 3 months). Replacements are available
from specialised dealers. Your ENA is equipped
with the HP1 milk system.
U
Clean the inside of the water tank, e.g. with a
brush. Further information about the water
tank is provided in these instructions for use
(see Chapter 5 ‘Maintenance – Descaling the
water tank’).
U
Traces of milk and coffee may stick to the top
and bottom of the cup grille. If this happens,
clean the cup grille.
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a speciality coffee has been
prepared. If milk has been prepared, you will also
be prompted to clean the milk system.
T Place a receptacle under the dual spout.
T Press the On/Off button Q.
47
4 Permanent settings in programming mode
pt
es
nl
it
fr
ru
en
de
E If milk has been prepared, you will be
prompted to clean the milk system (‘Do you
want to clean the milk system now?’). After
10seconds the switch-off process continues
automatically.
‘Machine is rinsing’, the system rinses itself.
The operation stops automatically. Your ENA
is switched off.
4 Permanent settings in pro-
gramming mode
Press the ‘P’ button for approximately 2seconds to
enter programming mode. You can easily navigate
through the programme items and permanently
save the required settings using the multi-function
buttons. The following settings can be made:
Programme
item
Sub-item Explanation
‘Maintenance
status’
‘Clean’,
‘Clean the milk system’,
‘Descale’,
‘Filter’ (only if filter is fitted),
‘Rinse’,
‘Maintenance information’
T Here you can start the required maintenance
programme or find out what maintenance actions are
required.
‘Product
settings’
T Select your settings for speciality coffees and hot
water.
‘Machine
settings’
‘Switch off after’
T Set the time after which the ENA should switch off
automatically.
‘Save energy’
T Activate energy-saving mode.
‘Factory setting’
TReset the machine to its factory setting.
‘Units’
T Select the unit for the amount of water.
‘Water hardness’
T You can set the water hardness of the water used.
‘Choose language’
T Select your language.
‘Connect accessory’,
‘Disconnect accessories’
(Only displayed if the JURA
Smart Connect is being used.)
T Connect the ENA wirelessly to a JURA accessory or
disconnect the connection again.
‘Version’ Software version
48
4 Permanent settings in programming mode
Adjusting the product settings
Press the button of a product on the start screen
for about 2 seconds to view the list of setting
options. The following permanent settings can be
made:
Product Coffee strength Amount More settings
Ristretto,
Espresso
10 levels Coffee: 15ml–80ml Temperature (low,
normal, high)
Coffee 10 levels Coffee: 25ml–240ml Temperature (low,
normal, high)
Cappuccino,
Flat white
10 levels Coffee: 25ml–240ml
Milk foam: 3sec.–120sec.
Temperature (low,
normal, high)
Latte macchiato 10 levels Coffee: 25ml–240ml
Milk foam: 3sec.–120sec.
Interval: 0sec.–60sec.
Temperature (low,
normal, high)
Espresso macchiato 10 levels Coffee: 15ml–80ml
Milk foam: 3sec.–120sec.
Temperature (low,
normal, high)
Espresso doppio
(2 brewing operations)
10 levels Coffee: 30ml–160ml Temperature (low,
normal, high)
Portion of milk foam – Milk foam: 3sec.–120sec. –
Hot water – Water: 25ml–450ml Temperature (low,
normal, high)
Permanent settings in programming mode always
follow the same model.
Example:Proceed as follows to change the coffee
strength for one coffee.
Precondition:The start screen is displayed.
T Press the ‘Coffee’ button for approximately
2 seconds until the list of possible settings
appears.
‘Coffee’
T Press the ‘Coffee strength’ button.
‘Coffee strength’
T Press the ‘<’ or ‘>’ button to change the
setting for the coffee strength.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Coffee’
T Press the ‘Back’ button to return to the start
screen.
Automatic switch-off
By instructing your ENA to automatically switch
itself off, you can cut down your energy consump-
tion. If this function is activated, your ENA switches
off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off to 15minutes,
30minutes or 1-9hours.
Precondition:The start screen is displayed.
T Press the ‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘’ button.
T Press the ‘Machine settings’ button.
T Press the ‘Switch off after’ button.
‘Switch off after’
T Press the ‘<’ or ‘>’ button to change the
setting.
49
4 Permanent settings in programming mode
pt
es
nl
it
fr
ru
en
de
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings’
T Press the ‘Back’ button for approximately
2 seconds to return to the start screen.
Energy-saving mode
In the programme item ‘Machine settings’ / ‘Save
energy’ you can set an energy-saving mode:
U
‘Save energy’ / ‘Active’
U
Soon after the last preparation, the ENA
stops heating up.
U
Before you can prepare a speciality coffee,
speciality coffee with milk, or hot water, the
machine must heat up.
U
‘Save energy’ / ‘Inactive’
U
All speciality coffees, speciality coffees with
milk and hot water can be prepared without
having to wait.
Example:Proceed as follows to deactivate the
energy-saving mode.
Precondition:The start screen is displayed.
T Press the ‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘’ button.
T Press the ‘Machine settings’ button.
T Press the ‘Save energy’ button.
‘Save energy’
T Press the ‘Inactive’ button.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings’
T Press the ‘Back’ button for approximately
2 seconds to return to the start screen.
Restore factory settings
In the programme item ‘Machine settings’ /
‘Factory setting’ the machine can be reset to its
factory setting.
Precondition:The start screen is displayed.
T Press the ‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘’ button.
T Press the ‘Machine settings’ button.
T Press the ‘’ button.
‘2/5’
T Press the ‘Factory setting’ button.
‘Factory setting’ / ‘Reset the machine to the
factory settings?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
Your ENA is switched off.
Unit for amount of water
In the programme item ‘Machine settings’/ ‘Units’
you can select the unit used for the amount of
water.
Example:Proceed as follows to change the unit for
the amount of water from ‘ml’ to ‘oz’.
Precondition:The start screen is displayed.
T Press the ‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘’ button.
T Press the ‘Machine settings’ button.
T Press the ‘’ button.
‘2/5’
T Press the ‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings’
T Press the ‘Back’ button for approximately
2 seconds to return to the start screen.
Setting the water hardness
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to set the water hardness accurately.
The water hardness was set when the machine was
first used. You can change this setting at any time.
The water hardness can be adjusted on a continu-
ous scale between 1 °dH and 30 °dH.
50
5 Maintenance
Precondition:The start screen is displayed.
T Press the ‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘’ button.
T Press the ‘Machine settings’ button.
T Press the ‘’ button several times until page
‘3/5’ is displayed.
T Press the ‘Water hardness’ button.
‘Water hardness’
T Press the ‘<’ or ‘>’ button to change the
setting.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings’
T Press the ‘Back’ button for approximately
2 seconds to return to the start screen.
Language
In this programme item you can set the language
used by your ENA.
Example:Proceed as follows to change the
language from ‘English’ to ‘Deutsch’.
Precondition:The start screen is displayed.
T Press the ‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘’ button.
T Press the ‘Machine settings’ button.
T Press the ‘’ button several times until page
‘3/5’ is displayed.
T Press the ‘Choose language’ button.
‘Choose language’
T Press the ‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen’
T Press the ‘Zurück’ button for approximately
2 seconds to return to the start screen.
5 Maintenance
Your ENA has the following integrated mainte-
nance programmes:
U
Rinsing the machine (‘Rinse’)
U
Cleaning the milk system (‘Clean the milk
system’)
U
Changing the filter (only if filter is fitted)
U
Cleaning the machine (‘Clean’)
U
Descaling the machine (‘Descale’)
E Clean the machine, descale the machine or
change the filter when you are prompted to
do so.
E In the programme item ‘Maintenance status’
you will find an overview of the maintenance
programmes. When the bar is completely
filled with red, your ENA will prompt you to
perform the appropriate maintenance
programme.
E In the interests of hygiene, you should clean
the milk system daily when you have been
preparing milk.
Rinsing the machine
You can initiate the rinse operation manually at
any time.
Precondition:The start screen is displayed.
T Place a receptacle under the dual spout.
T Press the ‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘Maintenance status’ button.
T Press the ‘’ button several times until page
‘3/3’ is displayed.
51
5 Maintenance
pt
es
nl
it
fr
ru
en
de
T Press the ‘Rinse’ button.
‘Machine is rinsing’, ‘Milk system is being
rinsed’, water flows out of the dual spout.
The rinse stops automatically. Your ENA is
once more ready for use.
Automatic milk system rinsing
15 minutes after milk preparation, the milk system
is automatically rinsed. Therefore always place a
receptacle under the dual spout after preparing
milk.
Cleaning the milk system
To ensure that the milk system in the dual spout
always works properly, you must clean it daily
when you have been preparing milk.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or traces could be left
behind in the water.
T Use only original JURA maintenance
products.
E JURA milk system cleaner is available from
specialised dealers.
E To clean the milk system, use the container
supplied.
Precondition:The ‘Cleaning the milk system’ (6)
symbol is displayed.
T Press the ‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘Maintenance status’ button.
T Press the ‘Clean the milk system’ button.
‘Clean the milk system’
T Press the ‘Start’ button.
T Press the ‘Next’ button.
‘Milk system cleaner’
T Remove the milk pipe from the milk
container or milk cooler.
T Add milk system cleaner to the front part of
the container up to the bottom mark
(indicated by 6).
T Then fill with water up to the upper mark.
T Place the container under the dual spout.
T Connect the milk pipe to the container.
E To connect the milk pipe to the container
correctly, the pipe must be fitted with a
connector.
T Press the ‘Next’ button.
‘Milk system is being cleaned’, the dual
spout and the milk pipe are cleaned.
‘Fresh water’
T Rinse the container thoroughly and fill the
front part with fresh water up to the upper
mark.
T Place it under the dual spout and reconnect
the milk pipe with the container.
T Press the ‘Next’ button.
‘Milk system is being cleaned’, the dual
spout and the pipe are rinsed with fresh
water.
The operation stops automatically. Your ENA
is once more ready for use.
6
52
5 Maintenance
Dismantling and rinsing the dual spout
The dual spout must be dismantled and rinsed
daily if milk has been prepared to make sure it
functions perfectly and also in the interests of
hygiene.
T Remove the milk pipe and rinse it thor-
oughly under running water.
T Pull the cover of the dual spout forwards
and off.
T Remove the milk system from the dual
spout.
T Dismantle the milk system into its individual
parts.
T Rinse all the parts under running water.
If there are severely dried-on milk residues,
firstly immerse the individual parts in a
solution of 250ml cold water and 1 capful of
JURA milk system cleaner. Then rinse the
parts thoroughly.
T Fit the air intake pipe.
T Reassemble the milk system. When doing
this, note the numbering of the individual
parts.
1
2
53
5 Maintenance
pt
es
nl
it
fr
ru
en
de
T Fit the assembled individual parts back in
the dual spout and press it firmly.
T Refit the cover of the dual spout.
Inserting/changing the filter
Your ENA no longer has to be descaled if you are
using the CLARIS Smart / Smart mini filter
cartridge.
E Once the filter cartridge stops working
(depending on the water hardness setting),
the ENA will prompt you to change the filter.
E CLARIS Smart / Smart mini filter cartridges
are available from specialised dealers.
Precondition:The start screen is displayed. (If the
filter needs to be changed, the $ symbol is also
displayed.)
T Remove and empty the water tank.
T Remove the used filter cartridge from the
water tank.
T Fit the filter cartridge extension on top of a
new CLARIS Smart / Smart minifilter
cartridge.
T Insert the filter cartridge with its extension
into the water tank.
T Fill the water tank with fresh, cold water and
reinsert the tank.
The machine has automatically detected
that you have just inserted/changed the filter
cartridge.
‘Filter is being rinsed’, the filter is rinsed.
Water flows directly into the drip tray.
The start screen is displayed. Your ENA is
once more ready for use.
1
2
click! click!
54
5 Maintenance
Cleaning the machine
After 160preparations or 80switch-on rinses, the
ENA will prompt you to clean it.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or traces could be left
behind in the water.
T Use only original JURA maintenance
products.
E The cleaning programme lasts approxi-
mately 20 minutes.
E Do not interrupt the cleaning programme.
The quality of cleaning will be impaired if
you do so.
E JURA cleaning tablets are available from
specialised dealers.
Precondition:The ‘Cleaning the machine’ (7)
symbol is displayed.
T Press the ‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘Maintenance status’ button.
T Press the ‘Clean’ button.
‘Clean’
T Press the ‘Start’ button.
T Press the ‘Next’ button.
‘Empty coffee grounds container’
T Empty the drip tray and coffee grounds
container and put them back into the
machine.
‘Clean’
T Place a receptacle under the dual spout.
T Press the ‘Next’ button.
‘Machine is being cleaned’, water flows out
of the dual spout.
The operation is interrupted, ‘Add cleaning
tablet’.
T Open the powder chute for ground coffee.
T Insert a JURA cleaning tablet into the powder
chute.
T Close the powder chute.
‘Clean’
T Press the ‘Next’ button.
‘Machine is being cleaned’, water flows out
of the dual spout repeatedly.
The operation stops automatically.
‘Empty coffee grounds container’
T Empty the drip tray and coffee grounds
container and put them back into the
machine.
Your ENA is once more ready for use.
Descaling the machine
The ENA builds up deposits of limescale over time
and automatically prompts you to descale it when
necessary. The degree of calcification depends on
the hardness of your water.
E If you are using a CLARIS Smart / Smart mini
filter cartridge, you will not be prompted to
descale.
55
5 Maintenance
pt
es
nl
it
fr
ru
en
de
J CAUTION
If the descaling agent comes into contact with the
skin or eyes, this can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean
water. Should you get any descaling agent in
your eye, see a doctor.
CAUTION
If the wrong descaling agent is used, the machine
could be damaged and/or traces could be left
behind in the water.
T Use only original JURA maintenance
products.
CAUTION
If the descaling operation is interrupted, there may
be damage to the machine.
T Allow the descaling programme to run to
the end.
CAUTION
If the descaling agent comes into contact with
sensitive surfaces (e.g. marble), damage cannot be
ruled out.
T Clean up any splashes immediately.
E The descaling programme lasts approxi-
mately 40minutes.
E JURA descaling tablets are available from
specialised dealers.
Precondition:The ‘Descaling the machine’ (%)
symbol is displayed.
T Press the ‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘Maintenance status’ button.
T Press the ‘’ button.
‘2/3’
T Press the ‘Descale’ button.
‘Descale’
T Press the ‘Start’ button.
T Press the ‘Next’ button.
‘Empty drip tray’
T Empty the drip tray and coffee grounds
container and put them back into the
machine.
‘Agent in tank’
T Remove and empty the water tank.
T Completely dissolve 3JURA descaling tablets
in a receptacle holding 500ml of water. This
may take several minutes.
T Pour the solution into the empty water tank
and insert it into the machine.
T Place a receptacle under the hot-water
spout.
T Press the ‘Next’ button.
‘Machine is being descaled’, water flows
repeatedly out of the dual spout and the
hot-water spout.
The operation is interrupted, ‘Empty drip
tray’.
T Empty the drip tray and coffee grounds
container and put them back into the
machine.
‘Rinse the water tank’ / ‘Fill water tank’
T Empty the receptacle and place it under the
hot-water and dual spouts.
T Remove the water tank and rinse it
thoroughly.
56
5 Maintenance
T Fill the water tank with fresh, cold water and
reinsert the tank.
T Press the ‘Next’ button.
‘Machine is being descaled’, the descaling
operation is continued, water flows out of
the dual spout and the hot-water spout.
‘Empty drip tray’
T Empty the drip tray and coffee grounds
container and put them back into the
machine.
Your ENA is once more ready for use.
E If the descaling operation stops unexpect-
edly, rinse the water tank thoroughly.
Descaling the water tank
Limescale deposits may form in the water tank. To
ensure correct function of the machine, descale
the water tank from time to time.
T Remove the water tank.
T If you use a CLARIS Smart / Smart mini filter
cartridge, remove this.
T Completely fill the water tank and dissolve
3 JURA descaling tablets in it.
T Leave the water tank with the descaling solu-
tion for several hours (e.g. overnight).
T Empty the water tank and rinse it thor-
oughly.
T If you use a CLARIS Smart / Smart mini filter
cartridge, insert this again.
T Fill the water tank with fresh, cold water and
reinsert the tank.
Cleaning the bean container
Coffee beans may be covered with a slight oil film
which remains on the walls of the bean container.
These traces may negatively affect the coffee
result. For this reason clean the bean container
from time to time.
Precondition:‘Fill bean container’ is displayed.
T Switch the machine off with the On/Off
button Q.
T Remove the aroma preservation cover.
T Clean the bean container with a soft, dry
cloth.
T Fill the bean container with coffee beans and
close the aroma preservation cover.
57
6 Display messages
pt
es
nl
it
fr
ru
en
de
6 Display messages
Message Cause/Result Action
‘Fill water tank’ The water tank is empty.
You cannot prepare any
products.
T Fill the water tank (see Chapter 3 ‘Daily
operation – Filling the water tank’).
‘Empty coffee
grounds container’
The coffee grounds container
is full. You cannot prepare any
products.
T Empty the coffee grounds container
and the drip tray (see Chapter 3 ‘Daily
operation – Daily maintenance’).
‘Drip tray not fitted’ The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare any products.
T Fit the drip tray.
‘Fill bean container’ The bean container is empty.
You cannot prepare any speciality
coffees, but you can prepare hot
water and milk.
T Fill the bean container (see Chapter 1
‘Preparing and using for the first time –
Filling the bean container’).
The ‘Changing the
filter’ ($) symbol is
displayed in red.
The filter cartridge no longer
works.
T Replace the CLARIS Smart / Smart
mini filter cartridge (see Chapter 5
‘Maintenance – Inserting/changing the
filter’).
The ‘Cleaning the
machine’ (7) symbol
is displayed.
The ENA is prompting you to
clean it.
T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the machine’).
The ‘Descaling the
machine’ (%) symbol
is displayed.
The ENA is prompting you to
descale it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine ’).
The ‘Cleaning the
milk system’ (6)
symbol is displayed.
The ENA prompts you to clean
the milk system.
T Perform milk system cleaning (see
Chapter 5 ‘Maintenance – Cleaning the
milk system’).
‘Too hot’ The system is too hot to start a
maintenance programme.
T Wait for several minutes until the
system has cooled or prepare a speciality
coffee or hot water.
58
7 Troubleshooting
7 Troubleshooting
Problem Cause/Result Action
Insufficient foam is
produced when the milk
is frothed or milk sprays
from the dual spout.
The dual spout is dirty.
T Clean the milk system in the dual spout
(see Chapter 5 ‘Maintenance – Cleaning the
milk system’).
T Dismantle and rinse the dual spout (see
Chapter 5 ‘Maintenance – Dismantling and
rinsing the dual spout’).
Coffee only comes out
in drips when it is being
prepared.
Coffee or ground coffee has
been ground too finely and
is blocking the system. The
water hardness may not
have been correctly set.
T Put the grinder on a coarser setting or use
coarser ground coffee (see Chapter 2
‘Preparation – Adjusting the grinder’).
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine’).
‘Fill water tank’ is not
displayed although the
water tank is empty.
There is a lot of limescale in
the water tank.
T Descale the water tank (see Chapter 5
‘Maintenance – Descaling the water tank’).
Grinder is making a very
loud noise.
There are foreign objects in
the grinder.
T Contact customer support in your country
(see Chapter 11 ‘JURA contact details/ Legal
information’).
‘Error2’ or ‘Error5’ is
displayed.
If the machine has been
exposed to the cold for a
long period of time, heating
may be disabled for safety
reasons.
T Warm the machine at room temperature.
Other ‘Error’ messages
are displayed.
–
T Switch the ENA off with the On/Off
button Q. Contact customer support in
your country (see Chapter 11 ‘JURA contact
details/ Legal information’).
E If you were unable to solve the problem,
contact customer support in your country
(see Chapter 11 ‘JURA contact details/ Legal
information’).
59
8 Transport and environmentally friendly disposal
pt
es
nl
it
fr
ru
en
de
8 Transport and environmentally
friendly disposal
Transport/ Emptying the system
Keep the packaging for your ENA. It should be used
to protect the machine during transport.
In order to protect the ENA from frost during
transport, the system must be emptied.
Precondition:The start screen is displayed.
T Remove the milk pipe from the dual spout.
T Place a receptacle under the hot-water
spout.
T Press the ‘’ or ‘’ button the number of
times needed to display page ‘5/5’.
T Press the ‘Hot water’ button.
‘Hot water’, hot water flows out of the
hot-water spout.
T Remove and empty the water tank.
Water will flow out of the hot-water spout
until the system is empty.
‘Fill water tank’
T Press the On/Off button Q.
Your ENA is switched off.
Disposal
Please dispose of old machines in an environmen-
tally neutral way.
H
Old machines contain valuable, recyclable materi-
als which should be recycled. Please therefore
dispose of old machines via suitable collection
systems.
9 Technical data
Voltage 220–240V~, 50Hz
Power 1450W
Conformity mark
A
Pump pressure static, max. 15bar
Holding capacity of
water tank (without
filter)
1.1l
Holding capacity of
bean container
125g
Holding capacity of
coffee grounds
container
approx. 10 servings
Cable length approx. 1.2m
Weight Art. 15241: approx. 10.9kg
Art. 15252/15240/15254:
approx. 9.4kg
Dimensions
(W×H×D)
27.1 × 32.3 × 44.5cm
Milk system HP1
Wireless connections:
CLARIS Smart / Smart
mini filter cartridge
(RFID technology)
Frequency band
13.56 MHz
Max. transmission
power < 1 mW
JURA Smart Connect
(Bluetooth connection)
Frequency band
2.4 GHz
Max. transmission
power < 1 mW
60
10 Index
10 Index
A
Addresses 62
Adjusting the product settings 48
Aroma preservation cover
Bean container with aroma preservation
cover 37
Automatic switch-off 48
B
Bean container
Bean container with aroma preservation
cover 37
Cleaning 56
Filling 40
Bluetooth 42, 59
Bus bar
Technical data 59
Button
On/Off button 37
C
Caffè latte 43
Cappuccino 43
Cappuccino frother cleaning
Cleaning the milk system 51
CLARIS Smart mini filter cartridge
Changing 53
Inserting 53
Cleaning
Bean container 56
Machine 54
Coffee 43
Coffee grounds container 36
Connecting an accessory 42
Consistency of grind
Adjusting the grinder 45
Grinding wheel 37, 45
Contact details 62
Cup grille 36
Customer support 62
D
Daily maintenance 46
Declaration of Conformity 62
Descaling
Machine 54
Water tank 56
Display 36
Display messages 57
Disposal 59
Drip tray 36
Insert 36
Dual spout
Dismantling and cleaning 52
Height-adjustable dual spout 36
E
Emptying the system 59
Energy-saving mode 49
Errors
Troubleshooting 58
Espresso 43
Espresso doppio 43
EU Declaration of Conformity 62
F
Factory settings
Restore factory settings 49
Filler funnel
Filler funnel for ground coffee 37
Filling
Bean container 40
Water tank 45
Filter
Changing 53
Inserting 53
First-time use 41
Flat white 43
G
Ground coffee 44
Measuring spoon for ground coffee 37
Powder chute for ground coffee 37
H
Homepage 40
Hotline 62
Hot water 45
Hot-water spout 36
I
Insert for drip tray 36
Instant coffee
Ground coffee 44
Internet 40
J
JURA
Contact details 62
Internet 40
61
10 Index
pt
es
nl
it
fr
ru
en
de
L
Language 50
Latte macchiato 43
M
Machine
Cleaning 54
Daily maintenance 46
Descaling 54
Regular maintenance 46
Rinsing 50
Setting up 40
Switching off 46
Switching on 46
Mains cable 36
Maintenance 50
Daily maintenance 46
Regular maintenance 46
Measuring spoon for ground coffee 37
Messages, display 57
Milk
Connecting milk 42
Milk system 59
Cleaning 51
Milk system rinsing 51
P
Permanent settings in programming mode 47
Powder chute
Powder chute for ground coffee 37
Preparation 43
Cappuccino 43
Coffee 43
Espresso 43
Espresso doppio 43
Espresso macchiato 43
Flat white 43
Ground coffee 44
Hot water 45
Latte macchiato 43
Ristretto 43
Problems
Troubleshooting 58
Product settings
Adjusting 48
Programming mode 47
Automatic switch-off 48
Energy-saving mode 49
Language 50
Restore factory settings 49
Setting the water hardness 49
Unit for amount of water 49
Proper use 38
R
Regular maintenance 46
Rinsing
Machine 50
Ristretto 43
S
Safety 38
Safety information 38
Service socket 37
Settings
Permanent settings in programming mode 47
Setting up
Setting up the machine 40
Smart Connect 37
Spout
Height-adjustable dual spout 36
Hot-water spout 36
Switching off 46
Switching on 46
Switch-off
Automatic switch-off 48
Symbol description 35
T
Technical data 59
Milk system 59
Tel 62
Transport 59
Troubleshooting 58
U
Unit for amount of water 49
Use, First-time 41
W
Water hardness
Determining the water hardness 41
Setting the water hardness 49
Water tank 36
Descaling 56
Filling 45
Website 40
Wireless connection 40, 53, 59
62
11 JURA contact details/ Legal information
11 JURA contact details/ Legal
information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. +41 (0)62 38 98 233
@ You will find additional contact details for
your country at jura.com.
@ If you need assistance with using
your machine, you can find this at
jura.com/service.
Directives
The machine complies with the following
directives:
U
2014/35/EU– Low Voltage Directive
U
2014/30/EU– Electromagnetic Compatibility
U
2009/125/EC– Ecodesign Directive
U
2011/65/EU– RoHS Directive
U
2014/53/EU – Wireless Voltage Directive
A detailed EU Declaration of Conformity for your
ENA can be found at jura.com/conformity.
Technical changes
We reserve the right to make technical changes.
The diagrams used in these instructions for use are
for illustration purposes only and do not represent
the original colours of the machine. Some details
of your ENA may vary.
Feedback
Your opinion is important to us! Use the contact
details at jura.com.
Copyright
The instructions for use contain information which
is protected by copyright. It is not permitted to
photocopy these instructions for use or translate
them into another language without the prior
written consent of JURA Elektroapparate AG.
J73913/ENA 8/de-ru/202004
