Loading ...
Loading ...
Loading ...
1. Release
latch
2. Pull out
!
!
CAUTION
Make sure vacuum cleaner is turned off and not
plugged into a power source.
WARNING: Do not attempt to remove belt.
Call the Eureka Customer Service HELPLINE
at 1-800-282-2886.
24h
1. Release
latch
2. Pull out
Washable pre and post-motor lters - clean regularly
1. On front of hand vac, locate the latch
and pull to remove plate and take out
pre-motor lter. Just below the cord on
the back of the hand vac, locate the
latch to remove the vented plate and
take out post-motor lter.
2. Lift out pre-motor lter and shake
off dust frequently. Rinse lter and
dry THOROUGHLY.
3. Reattach lters.
4. Click corresponding plates back
into place.
How to maintain your vacuum cleaner
CAUTION
Never operate vacuum
cleaner without all lters,
lter screen and dust cup
in proper position.
WARNING: Moving parts!
If debris cannot be removed easily, remove retainer to access
brushroll. Using athead screwdriver or coin turn screws to the
‘unlock’ position. Remove the brushroll and clear any tangled hair
and remaining debris.
Dust cup – Empty after each use
Click the dust cup release button, located
on the bottom of the dust cup to detach it
from the unit, and pull dust cup out.
Use handle on top of dust cup to remove
lid, empty dust cup and replace lid.
Washable brushroll – clean frequently
To reassemble:
1. Align one end of brushroll with oor nozzle gear.
2. Press other end into slot.
3. Place retainer back in place and put in screws and turn to
‘lock’ position.
www.eureka.com 9
How to maintain brushroll
To avoid unnecessary service calls, periodically check brushroll for debris. If brushroll gets clogged
it will automatically shut off. Turn vacuum off and unplug before attempting to remove clog.
Step on oor nozzle to lower handle. Turn vacuum face down
on oor. Use scissors to clip heavy threads or strings.
2
3
1
Loading ...
Loading ...
Loading ...