Loading ...
Loading ...
Loading ...
!
N O T I C E : Thermal cut-off
This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor
overheating. If the vacuum suddenly shuts off, proceed as follows: 1) Check the vacuum for a
possible source of overheating such as a full dust cup, blocked wand or clogged lters. If these
conditions are found, x them and wait at least 30 minutes before attempting to use the vacuum.
2) After the 30 minute period, press the power button. If the vacuum still does not work, call the
Eureka Customer Service HELPLINE at 1-800-282-2886.
Problem Solution
Motor will not start
• Push cord securely into electrical outlet, try another outlet
or check circuit breaker.
• See detailed “thermal cut-off” instructions above.
Not enough suction power
• Empty dust cup and clean or change lters. See page 9 for
maintenance instructions.
• Remove clogs that restrict the airow.
Brushroll will not turn
• Check brushroll for debris. See page 9 for maintenance instructions.
Problem solving
Make sure vacuum cleaner is off and charging plug is unplugged.
www.eureka.com 11
Loading ...