Loading ...
Loading ...
Loading ...
Section 3: Assembly
,
Before connecting gardenhoseto w_ter inlet,inspect
inletscreen (Figure6),Clean screen ifit contains debris,
replaceit ifit isdamaged,DO NOT RUN PRESSURE
WASHER IFSCREENISDAMAGED,
4, Run water through garden hose for30 seconds to
cleanout any debris,Turnoffwater,
IMPORTANT: DO NOT siphonstandingwater forthe
water supply,Use ONLY coldwater (lessthan 100ยข'F).
5, Connect gardenhose (notto exceed 50 feetinlength)
to water inlet.Tightenby hand (Figure6).
6, Turn ON water and squeeze trigger on spray gun to
purge the pump system of air and impurities,
WARNING
adequate eye protection,
Checklist Before Starting Engine
Review the unit's assembly to confirm you have performed
allof the following:
I. Make sure handle is in place and secure.
2. Check that oit has been added to the proper level in
the engine crankc_e.
3. Add proper fuel to fuel tank.
4. Check for properly tightened hose connections.
5. Check to make sure that there are no kinks, cuts, or
damage to the high pressure hose.
6, Provide a proper water supply at an adequate flow.
7, Be sure to read "SafeLy Rules" and "How To Use Your
PressureWasher" before using the pressure washer.
t
Loading ...
Loading ...
Loading ...