Loading ...
Loading ...
Loading ...
Section 4: Operation
How to Stop Pressure Washer
• Turn engine off according to instructions _ven in engine
owner's manual.
• Squeeze trigger on spray gun to relieve pressure
in hose,
NOTE: A small amount of water wilt squirt out when you
release the pressure,
How to Use Adjustable Nozzle
You should now know how to START and STOP your
pressure washer.The information in this section wilt tell
you how to adjust the spray pattern and to apply detergent
or other cleaning chemicals.
CAUTION
I, Slide nozzle forward when you wish to adjust spray to
low pressure mode (Figure 9). Slide nozzle backward
to achieve high pressure.
Slide nozzle backward Slide nozzle forward for
for high pressure mode: low p_ssure mode _nd
detergent application.
2,
,
4,
S,
6,
Point nozzle down towards a firm surface and press
trigger to test spray pattern (Figure I0).
Twisting nozzle adjusts spray pattern from a narrow
pattern to a fan pattern (Figure I I).
Twist nozzle Twist nozzle clockwise
counterclockwise for fan for narrow spray
spray pattern, pa_ern.
}:or most effective cleaning, Keep spray nozzle frorr
8 to 24 inches away from cleaning surface.
If you get spray nozzle too close, especially using high
pressure mode, you may damage surface being cleaned.
DO NOT get: closer than 6 inches when cleaning tires.
m
Loading ...
Loading ...
Loading ...