Loading ...
Loading ...
Loading ...
SEWINGMACHINEDIV.20 MODEL385.19001890
PARTREMOVALAND REPLACEMENT
DC MOTOR UNIT AND BELTTENSION
TO REMOVE:
1. REMOVE THEBELTCOVER (SEEP.20).
2. PULL OUT THE PLUG CONNECTOR FROM A-BOARD AND REMOVE THE 2 SCREWS (A).
THEN REMOVE THE DC MOTOR UNIT(B).
TO ATTACH:
1. PASSTHEMOTOR CORD UNDER THEARM RIB,THENATrACH THEMOTOR WITH 2 SCREWS
(A) TEMPORARILY AS SHOWN BELOW.
2. TIGHTEN MOTOR FIXING SCREWS (A) FIRMLY WHEN THE MOTOR BELTTENSION ISCOR-
RECTAS SHOWN BELOW.
3. INSERTTHE CONNECTOR TO THEA-BOARD.
4. ATTACH THE BELTCOVER. THEMOTOR CORD SHOULD BESETON THE LEFTSIDE OF THE
BELTCOVER BOSS (B).
V1OTORCONNECTOR
(WHITE COLOR)
\
"_ PRESSURE200 g
BENDING AMOUNT
ABOUT 5 MM
DC MOTOR (B)
\
BELTCOVER BOSS (B)
", MOTOR BELT
PASSTHE CONNECTOR UNDER THE ARM RIB "'_\
MOTOR FIXING SCREWS (A) "
57
Loading ...
Loading ...
Loading ...