Loading ...
Loading ...
Loading ...
SEWING MACHINE DIV. 20 MODEL 385.19001890
MECHANICAL ADJUSTMENT
NEEDLEBAR HEIGHT
MACHINE SETTING:
I. PAI-rERN: NO.I (STRAIGHT STITCH)
2. TURN THE POWER SWITCH OFF.
PREPARATION:
1 REMOVE THE NEEDLE, PRESSERFOOT, NEEDLE PLATE(A) AND BOBBIN HOLDER (B).
2. INSERTTHERADIAL TIMING GAUGE #68497 (C) INTO THEHOOK.
3. AI-rACH THE NEEDLE BAR HEIGHTGAUGE#68168 (D).
*PUSH ITUP UNITL ITSTOPS.
4. TIGHTEN SCREW (E).
TO CHECK:
1. TURN THE POWER SWITCH ON.
2. TURNTHE HANDWHEEL TOWARD YOU UNTIL THE NEEDLE BAR (F) REACHES ITSLOWEST
POSITION.
*IFFINGER (G) COMES DOWN ON TOP OF PIN (H), OR IF PIN (I) TOUCHES THESURFACE
OF GAUGE (K) TOO FORCEFULLY,ADJUST AS DESCRIBED ON THE NEXTPAGE.
3. THE FACE OF FINGER (G) SHOULD HIT THE SIDE OF PIN (H) AND THE END OF PIN (I)
SHOULD TOUCH THESURFACE OF GAUGE (K) WHEN THE NEEDLE BAR (F) REACHES ITS
LOWEST POSITION.
26
Loading ...
Loading ...
Loading ...