Loading ...
Loading ...
Loading ...
SEWINGMACHINEDIV.20 MODEL385.19001890
MECHANICAL ADJUSTMENT
NEEDLEPOSITION
*WHEN THE STRAIGHT STITCH ISSELECTED, THE NEEDLE SHOULD BE AT THE CENTER OF
HOLE OF THE NEEDLE PLATE.
*WHEN THE ZIGZAG STITCHISSELECTEDWITH THEZIGZAG WIDTH SETTO THE MAXIMUM
(7.0), THE CLEARANCE BETWEENTHESIDE OF THENEEDLE AND THEEDGE OF HOLE OF
THE NEEDLE PLATEAT THE LEFTAND RIGHT NEEDLE POSITION SHOULD BE 0.2 MM OR
MORE.
MACHINE SETTING:
1. PATTERN: NO.1 (STRAIGHT STITCH)
2. NEEDLE BAR :LOWEST POSITION
PREPARATION:
1. OPEN THE FACE COVER AND LOOSEN THESETSCREW (A).
2. MOVE THEZIGZAG ROD (B) LEFTOR RIGHT TO SETTHE NEEDLE(C) ATTHECENTEROF THE
HOLE OF THE NEEDLE PLATE(D). THEN TIGHTENTHE SCREW (A),
TO CHECK:
1. SELECTTHE ZIGZAG STITCH(NO.5). SETTHEZIGZAG WIDTH TO THE MAXIMUM (7.0).
2. TURN THE HANDWHEEL TOWARD YOU AND CHECK IF THE CLEARANCE BETWEENTHE
SIDE OF THE NEEDLE AND THE EDGE OF HOLE OF THE NEEDLE PLATE, AT THE LEFTAND
RIGHT NEEDLE POSITION, IS0.2 MM OR MORE.
SETSCREW (A)
HOLE OF NEEDLE PLATE(D)
NEEDLE#14 (C)
ZIGZAG ROD (B) I1 i I
0.2 MM OR MORE_t_ i _1
A=B
_0.2 MM OR
MORE
25
Loading ...
Loading ...
Loading ...