Loading ...
Loading ...
Loading ...
To cancem the Clock display:
If you do not want the time of day to dbpHay:
Press and hoid the Cancei and CHockpads for three seconds.
The time of day wiii disappear from the dispiay
When the chock dispiay is cancelled, press the CHock pad to
briefly display the time of day.
To restore the Cmeck dispJay:
Press and hoid the Cancei and CHock
pads for three seconds. The time of day
wiii reappear in the dispiay.
The timer can be set from one minute @0:01} up to 99 hours
and 59 minutes (99:59}.
The timer can be used independently of any other oven
activity'. It can also be set while another oven function is
operating.
The Timer does not control the oven. It only controls a
beeper.
To set the Timer:
1. Pressthe Timer pad.
° 00:00 lights in the display.
° The colon will flash.
2.
X
Timer
Press the A or V pad until the
correct time appears in the display.
° The colon will continue to flash.
3,
PressTimer pad again or wait four seconds.
° The colon continues flashing and the time begins
counting down.
° The last minute of the timer countdown wiii be displayed
as seconds.
a. At the end of the set time, one long beep wiii sound.
To cancel the Timer:
1. Pressand hold the Timer pad for three seconds.
OR
2. Press the Timer pad and set the time to 00:00.
Locking the Contro
and Oven Door
The touch pad controls and oven door can be locked for
safety, cleaning, or to prevent unwanted use. They will not
function when locked.
If the oven is currently in use, the controls and door cannot be
locked.
The current time of day wiii remain in the
display when the controls are locked.
To lock:
Press and hold the Cancel and Cook &
Hold pads for three seconds.
LOCK flashes in the display.
To unlock:
Hold
Press and hold the Cancel and Cook & Hold pads for three
seconds.
LOCK disappears from the display.
Fault Codes
BAKE or LOCK may flash rapidiy in the dispiay to aiert you if
there is an error or a probiem. If BAKE or LOCK flash in the
dispiay, press the Cancei pad. If BAKE or LOCK continue to
flash, disconnect power to the appiiance. Wait a few minutes,
and then reconnect power. If the flashing still continues,
disconnect power to the appliance and cail an authorized
servicer.
7
Loading ...
Loading ...
Loading ...