Loading ...
Loading ...
Loading ...
10 49-3000191 Rev. 2
ENGLISH
USING THE WASHER
Options
Prewash
Prewash is an extra wash before the main wash. Use it for heavily soiled clothes or for clothes with a
care label that recommends prewashing before washing. Be sure to add liquid or powder high efficiency
detergent, or the proper wash additive to the prewash dispenser. The PreWash feature will fill the
washer with water (adding the prewash detergent), tumble the clothes, drain and spin. Then the washer
will run the selected wash cycle. NOTE: The PreWash is not selected automatically and must be selected
before starting the cycle.
Tumble Care
Freshly tumbles your garments periodically for up to 8 hours after the wash cycle is complete to lessen
the setting of wrinkles and creases when you are not able to move clothing to the dryer right away. At
the end of the cycle, the display will scroll “END” and after ten minutes the Tumble Care will begin. It can
be stopped at any time by pressing the Power button. NOTE: The Tumble Care option cannot be added
to the My Cycle feature.
Steam
Steam adds steam into the washer early in the cycle to assist with loosening stains on the Whites,
Normal, Casuals, Bulky Items, Jeans, Towels/Sheets, Active Wear, and Baby Care cycles.
To use:
1. Turn power ON and select a wash cycle which has Steam as an option.
2. Select the Add Steam button to activate steam.
3. Press the Start/Pause button.
Time Saver
Use this option to reduce the overall wash cycle by at least 20% without sacrificing wash performance.
This feature is available on all cycles except Quick Wash, Sanitize, Allergen, Rinse+Spin, Drain+Spin,
and TubClean. This option will modify the wash cycle, slightly raising the wash temperature and using
more water to deliver equal wash performance as the basic cycle. All other features, such as Prewash,
Extra Rinse, Add Steam, etc, can be used with Time Saver but may adjust the total wash time.
To use:
1. Turn power on and select a wash cycle which has Time Saver as an option.
2. Make any adjustments to Soil, Temp and Spin as desired.
3. Press the Time Saver button to reduce the overall wash time.
4. Press the Start/Pause button.
PreWash
Compartment
B
B
I
J
H
Stain Removal Guide
The Stain Removal guide is pre-programmed with the ideal wash and rinse settings to tackle five
common stains. To use this feature, select the desired wash cycle and locate the Stain Removal guide
menu and select the stain you want to remove. Next, press Start.
For some stains, a prewash will be selected automatically. If desired, add detergent or wash additive to
the prewash dispenser. Add Steam cannot be selected along with this feature.
My Cycle
Set up your favorite combination of settings for each cycle and save them here for one touch recall.
These custom settings can be set while a cycle is in progress.
NOTE: You can store 1 My Cycle combination of settings for each cycle.
To store a My Cycle combination of settings:
1. Select your washing cycle.
2. Change Temp and Level settings to fit your needs.
3. Select any washing options you want.
4. Press and hold the
for 3 seconds to store your selection. A beep will sound and the button will light up.
To recall your stored My Cycle combination:
Select the cycle and press the
before washing a load.
To change your stored My Cycle combination:
Repeat steps 1–4.
My cycle
Loading ...
Loading ...
Loading ...