Kenmore 59672289200 User Manual

Loading ...

Trouble Shooting

OPERATION (continued)

POSSIBLE CAUSETOPIC

Refrigeratorrunstoo

SOLUTION

Controls need to be adjusted.

Door is not closing properly.

See "Installing Your Refrigerator-How to Adjust the

Temperature Controls" section on how to adjust your controls.

See "Installing Your Refrigerator-How to Level Your

Refrigerator" section on how to properly level unit.

Check gaskets for proper seal. Clean, if necessary. See

section on "Hints and Care-How to Clean Your Unit" for

instructions.

Check for internal obstructions that are keeping door from

closing properly (i.e. improperly closed drawers, ice buckets,

oversized or improperly stored containers or foodstuffs, etc.)

ICE

Unit is leaking water

Ice forms in inlet tube to ice

maker

Water flow is slower than

Plastic tubing was used to complete water

connection.

Improper water valve was installed.

Water pressure is low.

Freezer temperature is too high.

Water pressure is low.

Improper water valve was installed.

Sears recommends using copper tubing for installation.

Plastic is less durable and can cause leakage. Sears is

not responsible for property damage due to improper

installation or water connection.

See section on "Installing Your Refrigerator-How to

Connect the Water Supply" for Instructions. Self-piercing and

3A6"saddle valves cause low water pressure and may clog the

line over time. Sears is not responsible for property

damage due to improper installation or water connection.

Water pressure must be between 20 to 100 pounds per

square inch to function properly.A minimum pressure of 35

pounds per square inch is recommended for units with water

filters.

See "Installing Your Refrigerator-How to Adjust the

Temperature Controls" section on how to adjust your controls.

Freezer is recommended to be between Oto 2°F

(-18 to -17 o C).