Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
AIR FILTER (See Fig. 16)
Your engine wil] not mn _roper_y using a dirty air fiker.
Clean the foam pre-cleaner after every 25 hours of opera°
tion or every season, Sewice paper cad.ridge every 100
hours of operation or every season, whichever occurs first.
Service air cleaner more often under dusty conditions.
• Remove knob(s) and cover,
TO SERVICE PRE-CLEANER
, Slide foam pre-clear_er off cartridge,
Wash it in Tiquid deterg)n_ and water.
, Squeeze it dry in a ciean cloth
, Saturate it in engine oil. Wrap it in clean, absorbent
cloth and squeeze to remove excess oil.
• If verj dirty or damaged, replace pre-cleaner.
o Reinstall pre-cleaner over cartridge.
, Reinstall cover and secure with knob(s).
TO SERVICE CARTRIDGE
, Remove wing nuts and cartridge plate.
, Carefully remove cartridge to prevent debris from en-
tering carburetor.
Clean cartridge by tapping gently on flat surface, tf very
dirty or damaged, replace cartr dge
• Reinstall cartridge plate, wing nuts, precleaner, cover
and secure with knob(s).
IMPORTANT: PETROLEUM SOLVENTS, SUCH AS
KEROSENE, ARE NOT TO BE USED TO CLEAN THE
CARTRIDGE. THEY MAY CAUSE DETERiORATiON OF
THE CARTRIDGE. DO NOT OIL. CARTRIDGE, DO NOT
USE PRESSURIZED AIR TO CLEAN OR DRY
CARTRIDGE,
WING NUT
CARTRIDGE
<__ PLATE
FOAM
PRE-CLEANER
AiR SCREEN
3ARTRIDGE
CLEAN AIR SCREEN (See Fig. 17)
Air screen must be kept free of dirt and chaff to prevent
engine damage from overhoating. Clean with a wire brush
or compressed air to remove dirt and stubborn dried gum
fibers.
ENGINE COOLING FINS (See Fig. i7)
Remove any dust, dirt or oil from engine cooling fins to
prevent engine damage from overheating. Air guide covers
must be removed. Remove side panels and hood (See "TO
REMOVE HOOD AND GRILL ASSEMBLY" in the Service
and Adjustments section of this manual).
AIR GUIDE COVER (BOTH SIDES)
FIG. 17
FKG.16
18
Loading ...
Loading ...
Loading ...